Why would my tail lights work but not my brake lights?
The electrical ground is one of the things you should also check if the taillights are working and brake lights are not. This could be the possible issue, especially when the brake light switch is functional. Check for bad electrical ground which may be a result of corroded or damaged wires.
What to do if your tail light is not working?
The use of flashlight can help you identify the tail light fuse. After identifying the right fuse, you need to remove and inspect it. When the metal found inside the fuse is intact, the fuse is okay. However, a broken wire indicates that the wick is faulty.
Where are the brake lights and tail lights?
In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.
How can I tell if my tail lights have a fuse?
When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.
Is it dangerous to drive with broken tail lights?
So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.
The use of flashlight can help you identify the tail light fuse. After identifying the right fuse, you need to remove and inspect it. When the metal found inside the fuse is intact, the fuse is okay. However, a broken wire indicates that the wick is faulty.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.
So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.
