Why is the high salt light on on my Aqua rite?
High Salt LED is also on if the control is set for the wrong Turbo Cell type. The LCD screen will read “HI”. Verify that the salt level is 2700 – 3400 ppm. We recommend that you check the salt level with a water test kit to ensure accuracy.
How to read and adjust the Hayward Aqua rite SCG?
The Hayward Aqua Rite Salt Chlorine Generator displays a total of 9 diagnostic parameters that are accessed by pushing the Diagnostic button sequentially. The default display is the Average Salt Level. If the button is not pushed for 30 seconds, the display will revert back to this salt display.
What should the salt level be on my chlorine generator?
Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating. Step 1: Check your system to confirm that you have programmed the correct cell size.
What should instant salt reading be on Aqua rite pool?
Push the diagnostic button until you get to the instant salinty value, If its reading above 2700, then move “up” to superchlorinate and back “down” to ON position. That should calibrate your reference salt number. Pretty sure that is the steps. The instant salt reading is 2500.
How can I Check my Aqua rite salt level?
You can use the diagnostic button to see what the instant salt level reading is. Sequential pushes of the small “diagnostic” button next to the LCD display will cause the Aqua Rite to display the following information: Water temperature , Cell voltage, Cell current, Desired Output %, Instant salinity, Product name, Software revision level.
Which is the best salt chlorine generator for a pool?
The Hayward Aqua Rite Salt Chlorine Generator is hands-down the most popular residential salt chlorinator in the pool industry. Just like any other salt chlorine generator, the Aqua Rite may need a quick ‘tune up’ from time to time.
Why is the salt level on my Hayward Aqua rite not right?
Occasionally the salt level on the Hayward Aqua Rite may not match the actual salt level of the pool. If the salt cell is clean but the salt reading is off, the Aqua Rite will need to be re-calibrated. The following video will provide a guide on how to recalibrate a Hayward Aqua Rite.
Who is the best person to calibrate a chlorine generator?
Rob is a pool-service industry professional with over 20 years of experience. Before the chlorine generator can be calibrated correctly, the salinity—or salt level in the pool water—will need to be at the correct level.
