Why is no water coming out of my hot taps?
If water does not come from any of your taps: The ball valve may be stuck, which will have caused the cistern to empty. If this is the case, sharply move the float arm to dislodge the valve, and then give it a proper clean. The cold water cistern should fill up and your taps should start working again.
Why is there no water coming out of my hot water tap?
The following day after using the shower the ball cock has broken which meant all the water was coming out of the over flow pipe (at least that is working) sorted the ball cock, and now there is no water at all coming out of any of the hot water taps (have different taps around the house mixers etc) cold water from cold water taps not a problem.
What to do if your hot water is not working?
One popular method to fix this is to attach a hosepipe to a working tap e.g. your cold water tap, and then connect it to your hot tap. Turn the broken tap on first, fully open, and then turn on the working tag all the way up.
What to do when there is no water coming out of the tap?
Similarly, if no water coming out of tap when turned on, you should check if your water main is open. No water will run through your mainline, and therefore your faucets if your main valve is closed. We recommend that you open the main valve and try your taps again.
How can I get hot water out of my mixer?
In this case if you have a kitchen mixer tap place your thumb over the tap outlet, open the hot water tap with thumb firmly over the outlet then gently turn the mixer tap to the cold water position this will then force cold water under pressure through the hot water pipe leading to the hot water cylinder and force any air lock out.
The following day after using the shower the ball cock has broken which meant all the water was coming out of the over flow pipe (at least that is working) sorted the ball cock, and now there is no water at all coming out of any of the hot water taps (have different taps around the house mixers etc) cold water from cold water taps not a problem.
What can I do about hot water coming out of cold taps?
If the cold water intake line is comprised of PVC or similar plastic pipe, either directly from the heater or above the initial copper pipe, you can also make an “improvised” heat trap by incorporating a 6-12″ vertical drop in the line. Recall that the problem is convection–hot water’s tendency to rise upward.
One popular method to fix this is to attach a hosepipe to a working tap e.g. your cold water tap, and then connect it to your hot tap. Turn the broken tap on first, fully open, and then turn on the working tag all the way up.
Similarly, if no water coming out of tap when turned on, you should check if your water main is open. No water will run through your mainline, and therefore your faucets if your main valve is closed. We recommend that you open the main valve and try your taps again.
