Why is my Sundance Spa not heating?
Low flow in your spa or hot tub is most commonly associated with a dirty spa filter. If your spa heater won’t heat, remove and clean the filter(s) rule out a pressure or flow rate problem. Low water level, a clogged pump impeller, closed valves, clogged pipes or blocked spa drain covers can also cause flow issues.
When to replace Sundance 800 / 850 spa heater?
Sundance® Spas 1995-1999: Replaces the 6500-301 Heater used from 1995-1999 on 800/850 Series. If you have the old style vertical heater 6500-301, you will need to replace the High limit sensor 6600-168 when changing out the heater. They mount up to the same holes on the equipment can.
Who is your source for Sundance Spas heaters?
We are your Source for Heaters, Heater components and Complete Heater Assemblies for your Sundance® Spas. Sundance Spas Plastic Heater Assembly. Used on some 600 Series as well as 700 Series from 1987-1990. The Heater Element 6500-216 is obsolete. The components we have are what Sundance has in stock.
Is the Sundance smart heater 6500-310 returnable?
The 6500-310 Heater is returnable for warranty exchange only! Note the above issue of dryfire or leakage is not covered! NOTE: The heater is sold only as a complete unit (housing, O-ring, heater element, etc.). There are no individual pieces available from Sundanc®e Spas.
What kind of parts do I need for a Sundance spa?
We carry parts for Sundance ® spas that go back to the 1990s and earlier. From plumbing parts and 600, 800 Series air controls to circuit boards, blowers, filters, pumps, heater assemblies and replacement jets – get Intellijet and Magna jets and jet parts here at Hot Tub Outpost.
What kind of heater does Sundance Spa use?
Used on some 600 Series as well as 700 Series from 1987-1990. The Heater Element 6500-216 is obsolete. The components we have are what Sundance has in stock. Heater Assemblies for Sundance and Sweetwater Spas. Sundance Spas Stainless Bypass Heater Assembly. Used on all Sundance Permaclear Systems from 1995- 1/14/2000.
When do I need to replace my Sundance pool heater?
Sundance® Spas 1995-1999: Replaces the 6500-301 Heater used from 1995-1999 on 800/850 Series. If you have the old style vertical heater 6500-301, you will need to replace the High limit sensor 6600-168 when changing out the heater.
The 6500-310 Heater is returnable for warranty exchange only! Note the above issue of dryfire or leakage is not covered! NOTE: The heater is sold only as a complete unit (housing, O-ring, heater element, etc.). There are no individual pieces available from Sundanc®e Spas.
What are the temperature sensors on a Sundance Hot Tub?
Temperature sensors include the 600 Series sensors. Replacement pillows are available for many spa models. See all of our Sundance ® Spa pillows or contact us with a picture/measurement of the pillow you need, or the part number from the reverse side of the pillow if it is available.
