Why is my stair lift not receiving power?
Most stair lifts have a series of indicator lights that can tell you if the lift is receiving power. If these lights are not illuminated at all or only a red light is on, your lift is not receiving a charge. This may indicate that your batteries need replacing or that the outlet is not giving off a charge.
Why are the gears on my electric steps not working?
It could be that the gears are stripped on the motor (they’re plastic), so it only extends to where the bad spot is on the gears. If you can hear the motor spinning when the steps are stopped, that’s likely the problem. You could still have a bad controller, but in my experience, that’s the least likely possibility.
What to do if your steps have a bad motor?
If you get a motor with the wrong number of teeth, don’t panic. You can usually move the correct gears from the old motor to the new one. The control unit for the steps is a solid-state unit that has no moving parts and very seldom fails. Almost all erratic step behavior is caused by a bad motor.
Why is the step motor on my RV not working?
If a positive or negative voltage is present when the door switch is activated, then the step motor is getting power, but not working. The step motor is likely bad and needs to be replaced. WARNING: Be careful where you place your hands and arms when reconnecting plugs on the step.
What to do if your step motor is not working?
Start by making sure you have power to the step motor. Then trace the wiring all the way to the battery. You are looking for loose or broken wires, poor continuity, bad grounds, or blown fuses. Do not forget to check for faulty parts or bad connections to the door switch sensor and the on/off switch to the steps.
Most stair lifts have a series of indicator lights that can tell you if the lift is receiving power. If these lights are not illuminated at all or only a red light is on, your lift is not receiving a charge. This may indicate that your batteries need replacing or that the outlet is not giving off a charge.
What to do if your steps are not working?
Do not forget to check for faulty parts or bad connections to the door switch sensor and the on/off switch to the steps. If you still cannot determine what the problem is then contact the step manufacturer and/or Jayco for help. If that fails to bring results, then you will have to take the RV to a competent RV repair facility. Hope that helps.
Why does my stair lift make a beeping noise?
Ensure the seat is swiveled and locked into place. Some stairway lifts make a beeping noise when the chair is not swiveled and locked into the riding position, but others don’t. This is an easy thing to check, and you should hear a “click” when it locks into place.
