Why is my RV slide not going all the way out?

RV Slide will Not Go all the Way Out Most RV problems can be solved by looking for simple obstacles or obstructions first. If this problem is happening to your kitchen slide out then you may have some plumbing lines or other kitchen equipment in the way.

Why are my slide outs not going in or out?

If you hear a weird noise when you try to extend the slides, it could be the pump trying to work. If you just can’t seem to make those slide outs go in or out, it is possible on most RVs to manually extend or retract the slides.

Do you need to replace the slide out valve?

If you do not get any power at the pump then you need to replace the switch. But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one.

Why does my slide out keep blowing fuse?

RV Slide out Keeps Blowing Fuse. One of the signs that comes with a blown fuse is that there may be a short in the wiring at some point. This may take some time to track down due to the amount of wiring slide outs have. There also may be an internal fault in the controller.

Why is my slide out motor not working?

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.

What does it mean when slide outs don’t slide?

This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins. Although it’s pretty rare, there’s a chance they could both be broken.

Why is my passenger side slide not retracting?

My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.

Can a single pump be used to retract slide outs?

In either instance you will probably find yourself at the mercy of an RV repairman, who may or may not have the parts needed for a quick repair on hand. Also, due to the inherent power of hydraulics, a single pump/motor is often used to extend/retract all slide-outs. When it works, you’re golden.

What causes a slide out to not retract?

With that being said, the biggest issue with slide-outs doesn’t have anything to do with the extension/retraction process. It has to do with seals, the rubber gaskets that surround a slide-out and keep the elements at bay. Improperly installed seals can pull loose and affect movement of the slide.

How does a hydraulic slide out RV work?

First offered on high-end RVs with larger, heavier slide-outs, hydraulics are appearing more frequently on entry to mid-level units and may prove to be the end-all in the coming years. A hydraulic system works via a pump connected to a series of valves and lines.

Why does my slide not retract after new motor?

After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.

Why is my slide out pump not working?

Damaged valves are another common cause for pump failure. Hydraulic systems are typically found with larger slides. Being familiar with the type of slide out system you have helps in not only determining the issue, but also in choosing the correct repair parts.

What to do if your slide out is not working?

But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one. Also, check your wiring to make sure there are no loose connections or broken wires and connections.

Why is my slide out not working on my RV?

You’ll need to make sure you have enough power available for the slide out to function correctly. The slide out could also be misaligned or could be blocked by something in the way. You may need to resort to manually operating your slide out, so it is best to become familiar with the process before an issue comes up.

What to do when the slide out doesn’t slide?

A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!

What kind of switch do I need for slide out?

Magnetic switches are very commonly used for the sensor circuits stop point. (They do not fail often) The setup should have 2 high current relays – one for the extend and one for the retract function. Is the bathroom wall between the slide in question? or some other space/wall at one end of the slide.

Is there an electrical problem with the slide out?

Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.

What causes a hydraulic slideout to stop working?

Overview A common problem with hydraulic slideouts is that when the switch is pressed to extend or retract the slide, movement starts, then stops, then starts, then stops. There may be a few seconds

Why is my slide out not working in my RV?

Let’s start with the simple and easy to test causes before moving onto the more complicated items Whether hydraulic or electric, your slide out compartment will require power from the RV battery. If pressing the switch doesn’t trigger any sound or movement, the electrical system will be the right place to start testing.

What to do when slide outs don’t move?

Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.

Where is the slide out controller on a motorhome?

For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.

Are there any problems with the slide out on an RV?

Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.

How long to push in or out button on Jayco slide out?

Two small motors, 2 x aluminium rails a couple of gearboxes and a synchronizing electronic controller. To continue to push the in or out button for 3 to 5 seconds after the motors have stopped making noise.

Are there any problems with the slide out?

Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .

What happens when you push the slide out button?

To continue to push the in or out button for 3 to 5 seconds after the motors have stopped making noise. You can’t cause the slide out to end up on the ground if you hold your finger on the button for too long. The electronics will take care of shutting the system down once the slide out is in place.

Is it possible to fix an AC in an RV?

However, these may not be a very difficult situations to fix and it is possible for one to do it at home, provided that the right tools are used. Troubleshooting a not working AC may not be difficult if you have basic knowledge about AC’s. Most RV’s are equipped with AC’s from atwood, coleman, dometic or advent.

What should I do if my RV converter is bad?

In the case you want to play it safe, you could always take your RV to a workshop. Not every electrical problem is caused by the converter so it’s a good idea to let the professionals take over if necessary. While the method is costly, it could save you a lot of time stumbling around your broken vehicle.

How to fix a binding problem in a camper?

To fix this little problem you should first check to see if your RV or camper is level. If it isn’t then this may be the source of your binding problem. Then if your camper is level, then go inside and move any rugs that may be in the way and close all cabinet and other doors.

Why is My Step not working on my RV?

If the magnet in the door is not perfectly aligned with the switch in the door frame when the door is closed the step won’t activate. Switch #2 (override switch). This toggle switch is typically located near the door and is used to keep the step extended when parked.

What are the things you should never do to your RV?

Accidents often happen when people aren’t paying attention to what they’re doing, but it only takes one bad experience to make them realize that they don’t want to have a second one! Owners make dumb mistakes. When they do, they can cause serious damage. 1. Forgetting to Put the Pin in a Fifth Wheel

How can I tell if my RV has a clogged air vent?

You can check this by having someone go into the RV or trailer and flush the toilet while the water pump is off. If you black tank suddenly starts to flow more and it seems like a vacuum seal was broken by allowing air into the tank then you know the air vent is clogged.