Why is my Mira sport shower running cold?
The low flow light is NOT on at any time. No amount of twiddling with the dials will affect the temperature. Thoroughly cleaned the shower head, indeed run the shower without the shower head – in case of pressure build-up. Ensured the filter is clean and not obstructed.
Are there any problems with the Mira sport?
Mira Sport problems… Back plate. Light on but no water. Shower stopped working, No flow showing on 2 buttons, but no water regardless. Water cut out, low flow showing. Mira Sport overheating?
Is the overheat warning light on on the Mira sport Max?
Discussion in ‘ Plumbing and Central Heating ‘ started by Roughneck6zero, 5 Aug 2009 . Mira Sport Max 10.8 kw overheat warning light stays on, water flow is normal, temp cold , and no change in water temp at any setting. Can anyone point me to what might be wrong, and hopefully which spare part to order, please.
What kind of shower heater is Mira sport?
Mira Sport models covered by this guide: Mira Sport 7.5- A 7.5 kW 240 V AC (6.85 kW 230 V AC) heater. Available in white/ chrome finish. Mira Sport 9.0- A 9.0 kW 240 V AC (8.2 kW 230 V AC) heater. Available in white, white/chrome, and chrome finishes. Mira Sport 9.8- A 9.8 kW 240 V AC (9.0 kW 230 V AC) heater.
The low flow light is NOT on at any time. No amount of twiddling with the dials will affect the temperature. Thoroughly cleaned the shower head, indeed run the shower without the shower head – in case of pressure build-up. Ensured the filter is clean and not obstructed.
When does the overheat light come on on Mira sport?
Mira Sport 10.8kw. the overheat light comes on ? The overheat light comes on instantly I switch on at any temp setting and the water flows brilliantly but stone cold. Have cleaned the head, no joy. Should I be replacing something?
How old is the Mira sport shower unit?
Discussion in ‘ Plumbing and Central Heating ‘ started by tonysab, 13 Feb 2012 . Hi, we have a Mira Sport shower unit which is approx 10 years old. We don’t use it that much (it’s in the 2nd bathroom) but I noticed a few days ago it was dripping from the bottom of the unit.
What should I do about my Mira shower?
Mira state the following: Shower cycles from hot to cold. Showerhead blocked: Remove and descale showerhead. Water pressure below minimum required for shower operation: Make sure incoming mains water stopcock and/or shower isolating valve is fully turned on.
