Why is my hot tub temp so high?
A simple cause of hot tub overheating is the hot tub’s temperature may be set too high. So, if the hot tub is set to filter too many hours per day, it can cause overheating. Adjust your filter cycle duration cycle down and set it to run early AM and late PM, when the outside temperatures are coolest.
How do I lower the temperature of my hot tub?
Lower the Water Temperature Your hot tub temperature usually hovers around 100 degrees, so dial down the temperature to 85 degrees to cool off the water. If the outside temperature permits, feel free to turn off the heater altogether. Bonus: When the temperature is lower, there’s not limit to how long you can soak.
Why does my hot tub keep flashing red?
When the power indicator is FLASHING RED, this means that the heater high limit has tripped. This means that the tub could be above its temperature limit or that the filters are clogged. The red flashing lights usually means that you’ll need to call for service.
When to use Spa when temperature is flashing?
Do not use spa when temperature is flashing or the OH message is displayed. HLoH = Hi Limit Over Heat. Hi limit sensor is disconnected or shorted or the spa temperature is above 112° F. SEoP = Sensor open or disconnected. Heater disabled but the spa is operational. SESH = Sensor short, nonfunctional.
What does the blue light on my hot tub mean?
When the temperature of your hot tub changes outside of your range, the light will turn off. When the green light is flashing, this may indicate there is a problem within the temperature sensor. … If the light is still blinking call for service. The bottom BLUE light is an indicator for the power to the hot tub.
Why does my hot tub keep blowing fuses?
Thereof, Why does my hot tub keep blowing fuses? These fuses may blow due to, loose incoming connections at the spa at the breaker or a bad connection in the holder. … This may be the reason for a blown fuse on the incoming legs of power.
What does it mean when a hot tub light blinks?
Typically, there are either red or green lights that will blink on a hot tub to indicate a variety of issues that may occur. For example, a red flashing light may indicate a hi-limit trip, a dirty filter, or a stalled circ pump. Meanwhile, a green flashing light often indicates an error with the hot tub’s sensor.
Do not use spa when temperature is flashing or the OH message is displayed. HLoH = Hi Limit Over Heat. Hi limit sensor is disconnected or shorted or the spa temperature is above 112° F. SEoP = Sensor open or disconnected. Heater disabled but the spa is operational. SESH = Sensor short, nonfunctional.
What to do if your hot spring spa lights keep blinking?
Turn power to the spa off for 1 minute, then turn power back on. For 240 v spas, turn on the 20 amp breaker and then turn on the 30 amp breaker. For 120 v spas, plug in. If light continues to blink, Call our Spa Service Department for a service call. 413-594-2666 ext 110 My Hot Spring Spa has blinking Green and Red lights.
Are there any problems with my hot tub?
Hot Spring ® spa systems are reliable and will last a long time with regular maintenance, but issues do sometimes arise. To help set you on the right track toward fixing minor hot tub problems with jets, pumps, heaters, electrical systems, controls, and water quality, we’ve created an easy-to-follow chart below.
