Why is my dolphin pool cleaner doing wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. Outside of the water, the motor can burn out within one hour — or within minutes if it’s really hot. Another cause of flips and wheelies is too much air in the unit.
How do I deep clean my dolphin filter?
A. Do you clean your Dolphin filter bags and cartridges after EACH use? They may be clogged, so try a deep cleaning. Spray vigorously with a hose (L. to R., top to bottom) to rinse off coarse debris, fine particles and ultra-fine debris.
How long does a Dolphin Run after shutting off?
All within about 60 seconds. If I shut it off for a minute and then turn it on again, it starts up again just as normal but repeats the process, coming to a halt in less than a minute. The bag is clean, I have checked for debris or foreign objects in the drive belt.
What to do if your Maytronics dolphin stops moving?
If Your Maytronics Dolphin Stops. If your robot stops moving, you MUST shut it down until the problem is corrected. Failure to do so may burn out your drive system. You MUST check for toys or other objects such as acorns that may be stuck in the drive track causing it to stop.
What should I do if my dolphin won’t start?
You MUST check for toys or other objects such as acorns that may be stuck in the drive track causing it to stop. This is the best advice I can give you. Remove every last item from your pool before cleaning with your Dolphin. The smaller the object, the more important it be removed prior to cleaning.
What to do if your dolphin pool cleaner stops working?
Aquaquality Pools and Spas, Inc is now a dealer and service provider for Dolphin Pool Cleaners and Tiger Shark Pool Cleaners. 1-866-876-8643 Wet Transformer, Wet Power Supply. How to fix it. If your robot stops moving, you MUST shut it down until the problem is corrected. Failure to do so may burn out your drive system.
All within about 60 seconds. If I shut it off for a minute and then turn it on again, it starts up again just as normal but repeats the process, coming to a halt in less than a minute. The bag is clean, I have checked for debris or foreign objects in the drive belt.
What to do if your dolphin does not move?
• If your power supply unit’s “POWER/ON” button does NOT light up at all, you may need a replacement power supply. Take it to your local dealer for further testing or call Maytronics. 2. My Dolphin’s power supply turns on, but the Dolphin does not move: • If the Dolphin doesn’t move at all, there could be a problem with your cable.
How can I get My dolphin out of my Pool?
• Try placing the Dolphin in the pool from a different location. • The filters may be dirty. Try running the cleaner without the bag or cartridge filters. If the cleaner climbs the wall, thoroughly clean the filters before putting them back in the cleaner. • Scrub the pool floor.
Why does My dolphin want to float in my Pool?
• When a Dolphin wants to float it is usually due to trapped air in the cleaner or the pool’s chemicals are out of balance – either the pH or salinity. Refer to your owner’s manual for appropriate ranges.
