Why is my CleverSpa not working?
– Reset the hot tub by pressing the ‘Off/Test’ button on the RCD plug. – Wait 10 seconds then press ‘On/Reset’ to turn it back on again.
Why wont my CleverSpa heat up?
It may be that your filter is dirty. A dirty filter will not efficiently allow water to be drawn through the internal heater, where it would be heated and pumped back into the hot tub. Check your filter is clean, if you are unsure watch our video.
What is the error code for a temperature sensor?
The error codes above are related to a temperature sensor failure, overheat problems or a flow problem.
What are the error codes on the Pentair pool heater?
PENTAIR MASTERTEMP ERROR CODES CODE MEANING SFS STACK FLUE SENSOR E01 TEMPERATURE SENSOR E02 HIGH LIMIT SENSOR E03 THERMAL FUSE ERROR
What does it mean when a heater has a thermal cut out?
A thermal Cut out means something over heated or heat got where it wasn’t supposed to. If its a tankless heater, you can get that from scale build up in the exchanger. Or the exchanger sooted, or a flow(water issue).
What do the error codes on a hot tub mean?
Error codes indicate a problem and give you a good idea of what is wrong as long as you know what to look for – below are the error codes, but we have provided a brief guide to what the common faults are and the remedies. OH = Overheat Protection (Heater is deactivated, pumps low speed is activated).
The error codes above are related to a temperature sensor failure, overheat problems or a flow problem.
A thermal Cut out means something over heated or heat got where it wasn’t supposed to. If its a tankless heater, you can get that from scale build up in the exchanger. Or the exchanger sooted, or a flow(water issue).
Error codes indicate a problem and give you a good idea of what is wrong as long as you know what to look for – below are the error codes, but we have provided a brief guide to what the common faults are and the remedies. OH = Overheat Protection (Heater is deactivated, pumps low speed is activated).
