Why is my chlorinator off?
The ‘Chlorinator Off, Cell Sensor Open’ indicates that the system can not see a connection to the cell. Unplug the Turbo Cell then plug it back in.
How do you know if salt chlorinator is not working?
Signs that indicate that your system is not working include: Low chlorine levels in the pool water. No Flow indication on the flow monitor. Corroded plates. Indicator lights signaling cell damage.
What setting should my chlorinator be at?
We suggest you start your salt chlorine generator at 50 percent output and run it for a couple of days, then check the chlorine level. In a balanced pool, a good chlorine level is 1-3 parts per million. If your chlorine levels are low, you can raise the percentage, and if it’s high you can lower the percentage.
How long does a salt chlorinator cell last?
about five years
This is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced.
What number should my chlorinator be set at?
How many hours a day should a salt water pool pump run?
Salt chlorinator manufacturers tend to recommend running your pool pump 8 hours per day and they tend to suggest that you do so during the hottest part of the day when the sun is up.
Why is the salt readout on my Heyward chlorinator high?
Check under the diagnostics menu for the correct cell size. If you select the cell size to t-3, t-5 or t-9 instead of the correct t-15 then the salt readout from the controller will be high salt. Hello! I have a slightly different problem: I recently purchased online a new Heyward/Goldline T-cell-15 chlorinator.
When does a chlorinator shut down a salt cell?
Unlike low salt the system does not shut the chlorinator down when a specific salt level is reached. Instead the unit will suspend chlorination when the cell’s amperage draw exceeds a certain value.
When to turn off the chlorinator in a pool?
Check System Light On: Cell Power Error Message Verify the system is configured for correct model cell. (Page 18). If the incorrect cell is chosen, the system will inaccurately interpret the salt level in the pool and the system may turn the chlorinator off. Maximum Current (Amps) before shutdown Page 10 3.
What does ” chlorinator off low temperature ” mean?
‘Chlorinator Off Low Temperature’ means the current chlorinator cycle has been interrupted due to a cell temperature reading of less than 50°F. ‘Chlorinator Off High Temperature’ means the current chlorinator cycle has been interrupted due to a cell temperature reading of more than 140°F. Page 14 Check System Light On:
Check under the diagnostics menu for the correct cell size. If you select the cell size to t-3, t-5 or t-9 instead of the correct t-15 then the salt readout from the controller will be high salt. Hello! I have a slightly different problem: I recently purchased online a new Heyward/Goldline T-cell-15 chlorinator.
Unlike low salt the system does not shut the chlorinator down when a specific salt level is reached. Instead the unit will suspend chlorination when the cell’s amperage draw exceeds a certain value.
Check System Light On: Cell Power Error Message Verify the system is configured for correct model cell. (Page 18). If the incorrect cell is chosen, the system will inaccurately interpret the salt level in the pool and the system may turn the chlorinator off. Maximum Current (Amps) before shutdown Page 10 3.
When to shut down the Aqua Trol chlorinator?
The Aqua Trol systems are designed to only work with the t-5 model. The LCD display will read ‘HI’ when the amperage is above 6.40. Verify salt level is 2700 – 3400ppm and check with independent test to ensure accuracy. Unlike low salt the system does not shut the chlorinator down when a specific salt level is reached.
