Why is my Beachcomber Hot Tub in standby mode?
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
What do error codes mean on Beachcomber Hot Tubs?
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
What should the temp of a Beachcomber Hot Tub Be?
Take off the Heat shield cover to allow the water to cool down. The hot tub should automatically reset for a temp of 107°F (41.7°C). Duplicate actions used for “OHH”. Shut the power down to the beachcomber hot tubs and call your store if the hot tub won’t reset. Stands for “Ice”- The system has detected a potential condition for freeze.
Where are the double tiers on a Beachcomber Hot Tub?
Double Tiers are inset into both sides of the SafeAxiss Step to allow access into the hot tub by bathers from either side of the step. * Available only on Hybrid3™ Hot Tubs.
What makes the Beachcomber 300 series so good?
Beachcomber’s 300 Series establishes the benchmark for quality and value. No matter which Beachcomber you choose, you get the same high quality throughout our lineup. The 300 series gives you high value, with our traditional features that give easy use, relaxation and performance every day.
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
Can a cover Guy replace a Beachcomber Hot Tub?
The Cover Guy custom makes all Beachcomber Step Replacement material. Our Beachcomber customers will replace their hot tub step material at the same time as they change their hot tub cover, so The Cover Guy has made that an easy process for all our Beachcomber Hot Tub customers.
Take off the Heat shield cover to allow the water to cool down. The hot tub should automatically reset for a temp of 107°F (41.7°C). Duplicate actions used for “OHH”. Shut the power down to the beachcomber hot tubs and call your store if the hot tub won’t reset. Stands for “Ice”- The system has detected a potential condition for freeze.
