Why is hot tub not heating up?
Low flow in your spa or hot tub is most commonly associated with a dirty spa filter. If your spa heater won’t heat, remove and clean the filter(s) rule out a pressure or flow rate problem. Low water level, a clogged pump impeller, closed valves, clogged pipes or blocked spa drain covers can also cause flow issues.
What makes an artesian hot tub a artesian spa?
Choose the size and features that fit your needs. Artesian Spas provide the most effective, soothing and enjoyable form of relief when soaking in one of our hot tubs. Each hot tub is specifically designed to enhance the lifestyle and health of every customer. Not every body is the same, which is why not every hot tub is the same.
What to do if your spa heater does not heat?
Once they are removed, tape them together; turn the thermostat dial down to the off position, and turn the power back on. Make sure the spa is on the heater/filter cycle and water is flowing from the jets, turn the thermostat dial up while watching the contactor, if it closes when doing this, then re-test the heater using the amp-meter.
Is there a reset button on a spa heater?
Check the spa’s water flow for pump operation. Make sure the spa water is at the proper fill level. Never try to operate a heater if the spa is not at its proper fill level. Doing so can cause the pump to lose prime and the heater element to burn up. A spa heater has a high-limit reset button.
How to take care of your hot spring spa?
When you regularly and proactively care for your spa, it will keep giving back in valuable, healthy ways. Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements. Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs.
What does overheat mean on Artesian Hot Tub?
Stands for “Overheat”- and the tub shuts down. One of the sensors detected that the water in the hot tub is 110°F (43.3°C). DO NOT GET INTO THE WATER. Take off the spa cover to allow the water to cool down. The hot tub should automatically reset for a temp of 107°F (41.7°C).
What to do if your artesian hot tub freezes?
Take off the spa cover to allow the water to cool down. The hot tub should automatically reset for a temp of 107°F (41.7°C). Shut the power down to the hot tub and contact the dealer or service company if the hot tub won’t reset. Stands for “Ice”- The system has detected a potential condition for freeze. No action is needed.
Why is my artesian water heater not working?
The pumps may cycle on and off in some cases, and the heater may function during Freeze Protection. This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions.
How can I reset the temperature on my artesian spa?
Message that can be reset will appear with a “right arrow” at the end of the message. This message can be selected by navigating to it and pressing the select button. Means that the temperature of the water is unknown.
