Why does my water pump not work after I refill the tub?
The pump won’t work if you forget to open those valves before restarting the pump. And check that the jets of the pump are clear. Turning off the pump while you drain and refill the tub may have loosened debris from a deteriorated internal pump part and this may clog the jets.
How do you drain and refill a hot tub?
Turn the power to the spa off at the circuit breaker. Place your submersible pump in the hot tub footwell or deepest point. Run the hose to your drain. Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.
What to do if your hot tub pump has worn out?
If troubleshooting your hot tub pump doesn’t fix the issue, contact your local spa dealer for support. A hot tub service professional can perform a thorough hot tub pump check-up and diagnose each component of your spa. If your hot tub pump has worn out or has become damaged, a trained technician can replace it.
Why is my hot tub not running when I turn it on?
When the spa is refilled, some of that air may become trapped and act as a plug that keeps water from moving through the hot tub’s piping. If you turn on your spa, hear the pumps running, but see no water flowing from the jets, the most likely culprit is an airlock. Turn the spa off immediately to prevent damage to the heater and the pumps.
How to drain a hot tub and refill it?
Soak your filter in a degreaser, such as FRESHWATER ® spa filter cleaner, according to package instructions. Rinse the filter clean with a garden hose, spraying from all angles to ensure you’ve washed away all debris. Replace the filter and lock the handle. Do not overtighten. Refill your hot tub.
Can a sump pump be used to drain a hot tub?
To drain the water with a sump pump, follow the steps: Attach a garden hose to the sump pump. Place the pump at the deepest point of your hot tub. Run the hose’s open end to the draining place. Turn the sump pump on and start draining. When the hot tub is empty, turn the sump pump off and detach the hose.
How often should I clean my hot tub pump?
The hot tub shell has moisture which makes it a perfect breeding spot for bacteria. The filter ensures that pure water fills into your hot tub and prevents the pump from getting gunked up. It filters out all the dirt and contaminants, therefore it requires a deep cleaning at least once every three months after draining the water.
Can a shop vac be used to drain a hot tub?
Note: The Shop-Vac works like a vacuum cleaner and cannot be used to drain all the water from the hot tub. It is good for removing excess water. To drain the water quickly, use a sump pump. Follow 5 easy steps to drain water with a garden hose: Find the main hot tub drain plug. It is located at the bottom or at the corner of a hot tub.
