Why does my Sundance Spa have an air lock?
If you recently drained and refilled your Sundance Spa you could have an air lock. Remove your filter and stick the garden hose in that hole with a rag wrapped around it to force water into that line and hopefully alleviate a potential airlock.
Is there an error code on my Sundance Hot Tub?
My Sundance Certa 780 Series hot tub is showing an error of FL1. I went through the manual diagnostics and the error is still there. I contacted Aquatech and they suggested I clean the filter with the FilterBrite. In the first 4 years we basically used one filter and never got this error message.
What kind of error does Sundance certa 780 have?
My Sundance Certa 780 Series hot tub is showing an error of FL1. I went through the manual diagnostics and the error is still there. I contacted Aquatech and they suggested I clean the filter with the FilterBrite.
What to do if your spa has FL1 MSG?
Jamie try running the spa without a filter for a short period ie 10min. If the FL1 msg does not go away and you have good water movement from your Jet 1 pump on speed 1 you would want to check your connection from the PWA to the psi switch. If the connection is good you would want to check your psi switch for blockage.
What should I do when filling my Sundance Hot Tub?
When adding new water to your Sundance hot tub, Put your hose into the filter well so that it runs through the pipes as it fills up, This will help prevent air locks upon re-start. Once your hot tub is filled, You can turn the power back on so it can begin heating up (Do not power up the hot tub until the hose has been removed).
If you recently drained and refilled your Sundance Spa you could have an air lock. Remove your filter and stick the garden hose in that hole with a rag wrapped around it to force water into that line and hopefully alleviate a potential airlock.
My Sundance Certa 780 Series hot tub is showing an error of FL1. I went through the manual diagnostics and the error is still there. I contacted Aquatech and they suggested I clean the filter with the FilterBrite. In the first 4 years we basically used one filter and never got this error message.
How to fix BLB on Sundance spa Aqua-Tech?
Then, press the (CYCLE) button three times; The screen will display “U.” At this time the system is ready to accept your changes. 3. Press the select button and it will read “ON”. 4. Press the up or down temperature button until it reads “OFF”. 5. Press the cycle button and it will exit that menu and read CIRC.
What is the FL1 error code for Sundance spa Constance?
We have a Sundance Spa Constance (2011) and today also noticed the FL1 error code. In addition to the code, noticed that the pool is registering 72 degrees when it is set to 101. We have never had a problem with the hot tube, until now. We changed the UV bulb last summer and changed out the filters. Any assistance would be helpful.
How long does it take to drain a Sundance Hot Tub?
Run Jet pumps for 2 hours (make sure all jets are running and have not been manually turned off). You will need to turn the jets back on every 20 minutes. You are ready to begin draining your Sundance Hot Tub. Once you are ready to drain your Sundance hot tub, switch the power off at the GFCI breaker.
What do you need to know about the Sundance spa?
As you surrender ot the warm, bubbly water of a Sundance® spa, you’ll be whisked away by the right blend of heat, buoyancy and massage that will change thehway you fee. Our patented Fluidix® jets were co-developed with Bowels Fluidics Corp, experts in the field of Fluid Dynamics.
How to replace the gasket on a Sundance spa?
Replacement Parts for Sundance Spa. 1 O-Ring/Gasket, Waterway 2″. Product ID: 711-4030. $1.50. $2.00. Add to Cart. 2 Barb Plug, 3/4″ Slip, Shur-Grip. 3 PTFE Tape, 1/2″ x 520″. 4 Barb Plug 3/4″ (For New Smartplumb Manifolds) 5 Gasket, 2″ Pump Union. More items
