Why does my Pentair pump shut off?
It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it.
How does the ERR 0002 work on a Pentair Superflo?
The Err 0002 will prevent the pump from running until you clear the blockage. So, if the pump is on, hit the start/stop button to turn it off. There are two ways to clear the blockage. The method I always use is to remove the pump lid and pump basket, then I spin the impeller with a screwdriver.
Why is my Pentair Superflo pump not primed?
The most common one is the Err 0002 and it is usually caused by the impeller getting clogged and the pump is unable to prime. It is probably a built-in failsafe so that the pump doesn’t overheat and become damaged. The Err 0002 will prevent the pump from running until you clear the blockage.
What are the error codes on the Pentair pump?
Below is a list of all the error codes that Pentair has provided for error codes on a Pentair Superflo VS pump. These codes are a great way to do a simple diagnostic to see what issues your pump is having.
Why does my Pentair pool say err 000f?
I have a pentair variable speed and i went to set up spring schedule for the pump and the screen says err 000f cant do anything on the pump and dont want the pool turning on me any ideas as to what this is and how to fix it Welcome to TFP… A Great resource for all your pool questions…
Why is my Pentair Superflo vs not working?
An error occurred while retrieving sharing information. Please try again later. If you see that your SuperFlo VS is not running as scheduled, flip open the top and see if there is an error code of some kind. The screen will display an error code as Err and then display a number.
Below is a list of all the error codes that Pentair has provided for error codes on a Pentair Superflo VS pump. These codes are a great way to do a simple diagnostic to see what issues your pump is having.
What does 0f mean on a Pentair pump?
See page 14 “Pump Disassembly” for instructions for disassembling the pump. 0F – Absolute AC Under-Voltage Detected: This indicates that the supply voltage has dropped below the operating range of 99v. This could be caused by normal voltage variation and will clear itself.
Is there an error code on the Superflo vs?
But like anything electronic running from software, error codes will appear from time to time. If you see that your SuperFlo VS is not running as scheduled, flip open the top and see if there is an error code of some kind. The screen will display an error code as Err and then display a number.
