Why does my Lay Z Spa keep turning off?
Why does the spa switch off after 72 hours? This is a safety function. In order to reactivate the spa simply unlock the control panel by holding the lock/unlock key and then pressing the heater function.
How to check spa panel messages on Balboa direct?
1. Turn OFF the Power to the System and Turn it back ON again to put System into Priming Mode. 2. After about 45 Seconds, Check for Error Messages on the Topside Panel Display. If there is No Error Message, Select “No Error Message” Below. If there is Now an Error Message, select Message Other than CrC or CHKSUM FAIL below.
Do you have to be a spa technician to use Balboa direct?
This is NOT intended as a service guide or a means for you, as the consumer, to service your equipment in any way. this information is being provided for informational purposes only. Any and all service should be performed by a licensed spa technician.
What to do when there is no error message on Balboa?
If there is No Error Message, Select “No Error Message” Below. If there is Now an Error Message, select Message Other than CFEor CONFIG ERROR below or contact your Dealer or Service Organization. The “CFE” or “CONFIG ERROR” Configuration Error Appears to have been Corrected or is Intermittent.
What is the installation manual for a Balboa spa?
End User Warning This Installation Manual is provided solely to aid qualified spa service technicians in installing spas with control systems manufactured by Balboa Water Group. Balboa controls have absolutely no end user serviceable parts.
Are there any end user serviceable parts for Balboa?
Balboa controls have absolutely no end user serviceable parts. Balboa Water Group does not authorize attempts by the spa owner/user to repair or service any Balboa products. Non-qualified users should never open or remove covers, as this will expose dangerous voltage points and other dangerous risks.
What are the spa panel messages on Balboa?
Common Spa Panel Messages 1 Low Water Level. 2 Blocked Suction Fitting. 3 Blocked Skimmer. 4 Dirty Filter. 5 Too Many Closed Jets. 6 Closed Slice Valve. 7 Heat Related Pump Not Running. 8 Heat Related Pump Not Primed. 9 Contact your Dealer or Service Organization.
Where can I find the Balboa BP troubleshooting manual?
42211 C Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group. Balboa’s BP Troubleshooting & Service Manual SPA CONTROL SYSTEMS PANELS60 Hz BP500 BP2000G1 TP900, TP800, TP600, TP400 THIS MANUAL COVERS THE FOLLOWING:
