Why does my Jandy pool have no flow?
An old problem has come back again. No Flow with the Jandy Aquapure Handheld and the LCD panel one green light on and no error codes which I used to get in the past. The sensor is only about a year and a half old. The Chlorine cell is about 4 years old.
How many code-flow sensors does Jandy aquapure have?
(Generates 172 code – flow sensor service) Contact a pool professional. Salinity Sensor sees less than 0.2 gpl of salt, no salt in pool or sensor air locked. (Generates 175 code – flow sensor air lock)
How to troubleshoot Jandy aquapure error code 172?
Check salinity with Myron “L” meter calibrated for NaCl or test strips. Add salt as necessary Heated sensor element not heating. (Generates 172 code) Contact a pool professional. Flow sensor temperature sensor failure. (Generates 172 code – flow sensor service) Contact a pool professional.
How to check the salinity of a Jandy pool?
•The system will display the salinity reading, press the up arrow to increase the reading and the down arrow to decrease the reading. •When the proper reading is reached press the “Temperature” button within 5 seconds to store it in memory. 15 Transformer Voltage on Rev. 2 backboard Reading the AC voltage between T.P.-
An old problem has come back again. No Flow with the Jandy Aquapure Handheld and the LCD panel one green light on and no error codes which I used to get in the past. The sensor is only about a year and a half old. The Chlorine cell is about 4 years old.
What does the Jandy aquapure water softening system do?
Jandy’s AquaPure sanitizes swimming pools. AquaPure is a salt chlorine generating system used to sanitize your pool, using a closed-loop water-softening system. As with any electronic and mechanical systems, problems can occur.
Which is salt water pool purifying system does Jandy use?
Jandy Pro Series AquaPure is a heavy-duty, electronic saltwater swimming pool purifying system that uses ordinary salt to produce chlorine for salt water swimming pools.
Why is the flow light not working on my Jandy aquapure?
There is a button on the daughter board that you push to reset the sensor. Actually it is supposed to re-calibrate the salinity sensor. Once the unit comes on line, about 4 min, push and hold that button till the flow light on the board comes back on. OK so it is working now!
