Why does my hot tub say HL?
Hear this out loudPauseThe HL reading in the display stands for Hi-Limit. The hi-limit is measuring the temperature at the heater, not the actual water temperature of the spa. if your spa is reading HL, it will not allow your heater to turn on and therefore you will notice the pumps will be running close to 24 hours a day.
When do I need to reset my hot tub control panel?
If your hot tub control panel isn’t working then when it can be really frustrating. Having said that, sometimes all you need to do is a simple reset on your hot tub control panel to clear the problem and to get it back into action.
What to do if your hot tub is not working?
If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is. If the control panel simply seems not to be working you can check the connections to it and also see if any water has got in it which could be the problem.
Why does my hot tub control panel keep blinking?
If there is any condensation, dry it off. A blinking red light on the control panel may indicate it needs to be reset. For most models, you will need to turn off the power to the spa for a minute or two and then turn it back on again. Turn on the lower amp breaker first if you have a hot tub powered by 240 volts.
Why does my hot tub have an error message?
Hot tub control panel error messages – If your hot tub control panel has been showing an error message you will want to know how to clear it. Even if you have sorted out the problem that the error message is indicating it might still be continuing to show as a problem on the control panel.
If there is any condensation, dry it off. A blinking red light on the control panel may indicate it needs to be reset. For most models, you will need to turn off the power to the spa for a minute or two and then turn it back on again. Turn on the lower amp breaker first if you have a hot tub powered by 240 volts.
What should I do if my hot tub wont turn on?
Turn on the lower amp breaker first if you have a hot tub powered by 240 volts. If it is 120 volts of household power, simply unplug it and then plug it back in after a couple of minutes.
Why does my jaccuzzi hot tub turn on and off?
I inherited a Jaccuzzi Essence 345 used tub which was exclusively used indoors. The tub is in great shape and I am not having to many issues with the water however I noticed that throughout the day and night the tub turns on for roughly 45 -60 seconds then turns off and this seems to happen every few minutes.
Why does my hot tub keep Tripping the circuit board?
If the GFCI holds, then you have found the cause of the GFCI tripping. It will need to be replaced. If you have everything unplugged (including the main pump) and it still trips, then there may be an issue with the transformer that is soldered or plugged into the circuit board. If the transformer plugs into the board it can be easily replaced.
