Why does my hot tub say FL?
The most common reasons for the FLO error message are dirty filters, a low water level, clogged circulation pumps or bad sensors. If your hot tub is still showing the message, it may be your circulation pump causing the problem. Check your circulation pump for any debris that may be clogging it.
How long do Beachcomber Hot Tubs last?
The lower quality hot tubs only last up to 5 years before needing to be replaced. If you purchase a Beachcomber, your hot tub is built to last as long as you need it to! Around the country, there are Beachcomber hot tubs that are over 15 years old and still running like new!
Why is my Beachcomber Hot Tub in standby mode?
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
Where does the Beachcomber Hot tubs come from?
Beachcomber Hot Tubs from Surrey, BC have been manufacturing and selling spa products since 1978. The company offers a 30-day money back guarantee on their products, and they also offer many innovative design options such as the Hybrid3 and custom jetting.
What do error codes mean on Beachcomber Hot Tubs?
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
Can a cover Guy replace a Beachcomber Hot Tub?
The Cover Guy custom makes all Beachcomber Step Replacement material. Our Beachcomber customers will replace their hot tub step material at the same time as they change their hot tub cover, so The Cover Guy has made that an easy process for all our Beachcomber Hot Tub customers.
The blower and pumps activate automatically in spite of the status of the hot tub unit. Means the hot tub unit has entered Standby mode. Check that the Microfilter is in place and secure before depressing any buttons to remove the hot tub unit from Standby.
What to do if your hot tub overheats at Beachcomber?
Shut the power down to the hot tub and call the Beachcomber store if the hot tub won’t reset. Stands for “Overheat”- and the tub shuts down. One of the sensors detected that the water in the hot tub is 110°F (43.3°C). DO NOT GET INTO THE WATER. Take off the Heat shield cover to allow the water to cool down.
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
Beachcomber Hot Tubs from Surrey, BC have been manufacturing and selling spa products since 1978. The company offers a 30-day money back guarantee on their products, and they also offer many innovative design options such as the Hybrid3 and custom jetting.
