Why does my hot tub make a clicking noise?
A spa or hot tub that makes a clicking sound may be working just fine, but if the pump won’t turn on high speed, and all you hear is clicking, or the heater is not heating and you hear a clicking noise, they may be coming from spa relays or contactors.
Why is my hot tub not working properly?
The best way to avoid this is to winterize your spa correctly, cleaning each jet line and fully draining the hot tub before closing it for the season. Poor water circulation can be caused by not running the pumps long enough. For optimum flow, you should run your pumps for one hour for every 10 degrees of temperature.
How can I tell if my hot tub jet is turned on?
Mike check that your filter is not soiled. Remove it for a few minutes from the spa and see if the jet action improves on hi speed with no filter. You could also check that each jet is turned on. Those models typically had jets that could be turned on or off by grasping the jet itself and rotating.
Why does my spa make a humming noise?
Sometimes the humming noise precedes the popping of the circuit breaker. Another usual source for a spa humming noise is vibration – either of the sub-floor beneath the spa, or the equipment housed beneath the spa.
A spa or hot tub that makes a clicking sound may be working just fine, but if the pump won’t turn on high speed, and all you hear is clicking, or the heater is not heating and you hear a clicking noise, they may be coming from spa relays or contactors.
Why are my Jets leaking in my hot tub?
If the PH balance is not corrected it is likely that silicone corrosion will occur, causing weak jets and line leaks. The best way to avoid this is to winterize your spa correctly, cleaning each jet line and fully draining the hot tub before closing it for the season.
Why does my hot tub pump not hum?
If the breaker does not trip with the pump disconnected, you’ve found the source of the problem – a bad spa pump. NOTE: If your breaker is tripped but the pump does not hum when you flip the breaker back on, it could just be a bad fuse.
Mike check that your filter is not soiled. Remove it for a few minutes from the spa and see if the jet action improves on hi speed with no filter. You could also check that each jet is turned on. Those models typically had jets that could be turned on or off by grasping the jet itself and rotating.
