Why does my hot tub breaker keep blowing?
The electrical connections in your hot tub might become loose over time. This can lead to power fluctuations that cause your hot tub circuit breaker to trip. Professional electricians can inspect your hot tub and tighten any connections that are loose, which should fix the circuit breaker problem.
How to troubleshoot an instant tripping breaker on a hot tub?
The proper way to troubleshoot an instant tripping breaker is to first turn the GFCI breaker off. Then, access the spa pack and unplug all components (all water pumps, blowers, and Ozonator if the spa has one) except for the light. Then turn GFCI breaker back on.
What can I do if my ThermoSpas hot tub is not working?
If you reach the point of having no luck with keeping your water in balance, and have tried draining and refilling your tub, you can send us a sample of your hot tub water for analysis. Please contact ThermoSpas Customer Care Department at 800-876-0158, option 2. What can I do if the pH is my spa is high (over 8.0) and will not come down?
How to turn off pump 1 on the ThermoSpas?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
How does the ThermoSpas work in standard mode?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
When to trip a circuit breaker in a spa?
Use this procedure if the spa continually trips the breaker during operation. This is intended for use by spa service technicians only. Before beginning this procedure, ensure the GFCI circuit breaker is wired properly. We recommend using a Square D brand GFCI. Test for pump 1 or circulation pump and heater
Why does my hot tub breaker trip every time I turn it on?
After attempting to turn on the breaker a few times, with it tripping each time. You can eliminate the Heater as the cause or confirm it is the culprit, with just a few steps. First: Turn the Breaker off and test with a meter to be sure you have no power coming to the spa.
If you reach the point of having no luck with keeping your water in balance, and have tried draining and refilling your tub, you can send us a sample of your hot tub water for analysis. Please contact ThermoSpas Customer Care Department at 800-876-0158, option 2. What can I do if the pH is my spa is high (over 8.0) and will not come down?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
