Why does my Comfort Control Module stop working?

So, after my dome light switch broke (spring popped loose), and after trying to fix it myself, I’m now left with no power windows, power locks, or alarm, and my trunk light is on. After some net research, I found that it could be caused by the comfort control module. I’m wondering if this is an easy home fix.

Where are the fuses on the Comfort Control Module?

Check the fuses in the fuse panel (fuse #5, fuse #6, fuse #14, fuse #38) and if need be, the ones on top of your relay plate. Fuse 5: Comfort system, cuise control, Climatronic, AC, Heated seat control module, and control unit for multifunction steering wheel.

How to turn off the Comfort Control Tstat?

“When you install a new comfort control tstat you have to turn it off with switch on bottom, hold down mode and zone buttons and turn on switch at bottom while still holding down mode and zone. When you see FF you can release mode and zone and the tstat should be programed to your system.”

How do you change the time on Comfort Control Center 2?

Press the CLOCKbutton again and the minutedigits will flash, allowing the minute setting to be adjusted using the or buttons. Press it a third time and the AMor PMicon will flash, allowing the AM or PM setting to be adjusted using the or buttons.

How does the Comfort Control Center 2 thermostat work?

Press the FANbutton to select the desired fan speed. Each successive press will advance to the next available speed. Your selections will be Auto, LOW, MED, and HIGH. The fan will run continuously during LOW, MED, and HIGH fan settings. The fan will cycle on and off with the thermostat on AUTO setting.