Why do the HWH Jacks not extend when you press the extend button?
Ignition key is in the ACC position. Power on light on the HWH panel is on solid when the on button is pressed. None of the jacks will extend when the extend button is pressed for any jack. The power on light blinks when any of the jack extend buttons are pressed.
Is the 325 leveling system a push button system?
The 325 leveling system is a manually controlled, BI-AXIS push-button system. This system will always extend two [2] jacks at the same time, both front jacks, the left front and the left rear jacks, the right front and right rear jacks or both rear jacks.
How are the jacks on a car controlled?
The jacks are controlled by the UP and DOWN arrow buttons on the right hand side of the touch panel. The UP arrows extend jack pairs and the DOWN arrows retract jack pairs. There are two parts to leveling a vehicle. First the vehicle is leveled. The jacks are used to turn all the yellow level indicators off.
Why are the leveling jacks on my RV not working?
Check the solenoid valve for any leaks. The cylinder itself could have a an internal leak, would have to check the seals. The manifold has a check valve that could have failed. Debris could have also entered the system either when the solenoid was installed or prior. You would then have to clean and flush the system.
How to trouble shoot a HWH leveling system?
Suggested tools for trouble shooting the HWH leveling systems: JUMPER WIRES (UP TO 10 GAUGE) PRESSURE GAUGE (3500 PSI MIN.) MULTI-METER 12 VOLT TEST LIGHT PROCEED WITH THE TROUBLE SHOOTING STEPS ON THE FOLLOWING PAGE 3. Check that the oil reservoir is full with the jacks in the fully voltage under load.
The 325 leveling system is a manually controlled, BI-AXIS push-button system. This system will always extend two [2] jacks at the same time, both front jacks, the left front and the left rear jacks, the right front and right rear jacks or both rear jacks.
Is the 625 leveling system automatic or manual?
The 625 leveling system is a computer controlled, BI-AXIS push button system. This system has automatic or optional manual control. This system will always extend two (2) jacks at the same time in the automatic or manual mode, both front jacks, the left front and left rear jacks, the right front and right rear jacks or both rear jacks.
