Why are there error messages on my artesian hot tub?
Some of these can indicate that you have a fault. Others will display operational messages to ensure optimal usage of the hot tub. There are six different ranges within Artesian Spa. They may display different codes. These ranges are: Download the full owner’s manuals here.
What to do if your artesian hot tub overheats?
DO NOT GET INTO THE WATER. Take off the spa cover to allow the water to cool down. Once the water has cooled down, you can also reset by pushing any button. Shut the power down to the hot tub and contact the dealer or service company if the hot tub won’t reset. Stands for “Overheat”- and the tub shuts down.
Why does my hot tub have an OH code?
It is almost always a flow problem. When it’s not a flow problem, it’s usually a bad temp sensor, high limit switch or a stuck relay. Here’s another Cal Spa troubleshooting flowchart for spa error codes OH, including testing the spa heater element for excessive resistance.
What should water temp be in artesian spa?
A water temp of 43.3 or more has been detected. Spa systems disabled. System will re-set once the temp is below 42.4 degrees. Check for extended pump operation or high ambient temperature. Fill the hot tub up. Pumps and heater will stop when this shows. Will only show on a hot tub that uses a water level sensor. None.
How to fix artesian spa’s hot tub error messages?
You may need to contact a technician Heater will shut down for 15 mins.Press any button to reset. If problem persists contact a technician. Heater may be dry. Due to low flow. Displays on third time of “dr”
It is almost always a flow problem. When it’s not a flow problem, it’s usually a bad temp sensor, high limit switch or a stuck relay. Here’s another Cal Spa troubleshooting flowchart for spa error codes OH, including testing the spa heater element for excessive resistance.
What does it mean when water temp is high on Artesian spa?
This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions. Once the spa water temperature is below 108°F (42.2°C), the system will auto reset. Conduct verification checks for high ambient temperatures and also extended pump operation.
What to do if your spa error code is Oh?
Here’s another Cal Spa troubleshooting flowchart for spa error codes OH, including testing the spa heater element for excessive resistance. This type of testing should only be done with the spa heater and all systems powered OFF, and only performed by someone who is qualified to test safely.
