Why a microwave stops working?
The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats.
Why is my slide out motor not working?
It apparently has 2 motors which are synchronized to work each end of the slide when I press the extend or retract button. One of the two motors stopped working. My Thor motorhome manual does not show a fuse for the motors in the fuse panel. (1) Is there a fuse for these motors & if so, where will I find them?
What to do if your microwave stops working?
To avoid this, cancel and sign in to YouTube on your computer. Welcome! See our family building Legos, having good family fun, and making memories through our YouTube Network. Our network promotes a positive environment for our kids and adults to learn, grow, and earn confidence through social media.
What to do when the slide out doesn’t slide?
A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!
Is there an electrical problem with the slide out?
Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.
What should I do if my Maytag microwave is not plugged in?
Unplug the microwave and remove the outer case screws. Pull the case back to remove it. Discharge the capacitor next–it will still have a dangerous charge even though the microwave is not plugged in. The quietest way to discharge it is by using a 100000 ohm 25 watt or larger resistor with a clip lead to the metal chassis.
Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.
Why is my slide out not working on my car?
To get back home to Katy, the power supply wires to the motor were “reversed” so the slide could be retracted so I could drive home to Katy, TX. With the power supply wires “reversed”, the slide will now not extend.
Why does my slide not retract after new motor?
After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.
