Where should toilet drain be placed?
Standard Drain Placement The standard placement for a toilet drain in the bathroom is 12 inches from the wall behind the toilet. The 12-inch measurement runs from the wall itself to the dead center of the drain.
What’s the best height for a toilet?
The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.
Where is the hole in the wall for a toilet?
Typically, the hole for the drain pipes is located 12 inches from the wall. Toilet models vary, though, so be sure to consult the model’s specifications to ensure the placement is accurate, as the necessary clearance can range from 10 to 14 inches.
How big is the wall behind a toilet?
Rear wall distance. The standard distance from the wall behind the toilet’s location to the centre of the drain underneath the toilet is 30 cm (12 inches).
What size hole for toilet flange?
The standard size for the hole over which the toilet flange will be installed is approximately 4 1/2 inches in diameter. This hole is centered, for most toilets, 12 inches from the rear wall behind where the toilet will sit. There should also be at least 15 inches from the center of the hole to the walls on either side.
How big of a space do you need for a toilet?
This measurement is 15 inches. That’s the minimum (you can have more). So looking at the toilet, make sure there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall). To the left… And the right…
How far should a toilet drain be from the wall?
The standard distance from the wall behind the toilet’s location to the centre of the drain underneath the toilet is 30 cm (12 inches).
How far from the wall should I install a toilet?
Toilets should be around 12 inches away from the wall. When designing or renovating a bathroom, you’ll need to know the toilet rough-in placement and measurement. This is how far the floor trap or toilet flange is required to be from the wall.
How far from should a toilet sit from a wall?
How Far From the Wall Should I Install a Toilet? Toilet Rough-In: Standard Measurements. On average, toilet rough-in placement tends to be 12 inches from the back wall. The Other Measurements. It’s typically required that toilets be a minimum of 15 inches from any side wall, shower or tub. Local Codes and Accessibility Matter.
How far should toilet tank be from wall?
Any wall, vanity, fixture or other element must be at least 21 inches from the front edge of the toilet. The NKBA recommends 30 inches for improved accessibility.
