Where is the water heater bypass valve on RV?

Your RV water heater bypass valve is located at the back of your water heater – inside your RV. The front of your RV water heater is where you will find your water heater anode rod and drain.

Is there a way to bypass the hot water heater?

This will allow the water to bypass the heater. One-valve system. Simply turn the valve perpendicular to the line on a one-valve system to bypass the hot water tank. You should also bypass your filter, or remove it, before you pour anti-freeze in the system. The winterization process can be a baffling practice for a new RV owner.

When to replace drain valve on RV hot water heater?

Behind it you will find an anode which is usually removed, when draining the tank for winterization. The anode gets loose with age, so replace it when it starts to look aged. You will need a 1- 1/16 socket for the anode rod. Now go into your RV and find the heater from the inside. You may need to remove a cover to access it.

What to do if your water heater is not working?

If your water heater is not working you want to check the connection on the control board and make sure it securely connected. You can unplug this and make sure it is not corroded on both the sides of the connections. Go ahead and just plug it back in after you have checked.

How can I troubleshoot MY Suburban water heater?

The Suburban water heater is a 12 gallon unit that runs on either propane or electric. When conducting your RV water heater troubleshooting steps for this unit you will want to locate the control panel. Look for the DCI lights on the panel and if they are lit you will need to go outside and push the reset buttons on the water heater.

How do I shut off the water heater in my RV?

This modal can be closed by pressing the Escape key or activating the close button. After a long afternoon of driving on the road or hiking in the woods, nothing feels better than having a nice, hot shower in your RV bathroom.