Where is the temperature regulator on a Kohler shower?
Locate the valve stem and collar on the temperature regulator. These are pieces that would connect to and turn the handle if it were still attached. You’ll then need to turn the valve stem and collar clockwise; this should initiate the hot water’s flow. Be careful of splashing yourself since the water may be too hot.
Is there a problem with the shower temperature control valve?
Shower temperature control valve problems (also know as a thermostatic mixer valve problems) are a common issue in many modern bathrooms. But how can you know that this is the issue? And how can you fix it? What is a Shower Temperature Control Valve (AKA a Thermostatic Mixer Valve)?
How do you remove a Kohler shower handle?
Using a Phillips screwdriver, unthread the two screws and remove the handle sleeve, shroud, and faceplate. If applicable, use a flat-blade screwdriver to remove the pin from the adaptor. Unthread and remove the adaptor from the valve.
Why is the thermostatic button on my shower stuck?
If the thermostatic shower button is stuck, it is most likely because the diverter valve is malfunctioning. This is relatively simple to check and adjust. First, you must remove whatever is blocking the valve, which could be the faucet or knob. These can be removed easily with a screwdriver or wrench.
Locate the valve stem and collar on the temperature regulator. These are pieces that would connect to and turn the handle if it were still attached. You’ll then need to turn the valve stem and collar clockwise; this should initiate the hot water’s flow. Be careful of splashing yourself since the water may be too hot.
How do you turn off the water in a Kohler shower?
Slide the collar onto the valve stem with the set-screw seated against the tab on the regulator housing. Slide the O-ring onto the valve stem until it is seated against the collar. Turn the valve stem counterclockwise to turn off the water. Install the faceplate and screws. Install the adapters, inserts and sleeves in the proper order.
Where is the handle on a Kohler shower?
Look for a screw connecting the handle to the faceplate (usually located under the curve of lever handles) and remove the screw with a screwdriver or an Allen wrench if needed. Set the hardware aside, taking note of where each piece came from, and remove the handle from the faucet so you can better access the faceplate.
How do you change the temperature of a shower valve?
Rotate the valve stem clockwise to turn the water on. Test the water temperature with a thermometer. When the desired water temperature has been reached, replace the red or black collar on the valve stem. Turn the stem counterclockwise to turn the water off.
