Where is the spa filter located?
Oftentimes, you can partially see the filter from the inside of the spa system. It is most often located inside of a canister, cradle, or lid. If you do not see such a compartment, check your owner’s manual to locate the filter. Turn your spa system off before you remove the filter.
How long do hot tub filters last?
How Long Should Hot Tub Filters Last? Hot Tub Filters should last a minimum of 1 year and generally speaking a maximum of 2 years. If a filter is maintained and cleaned regularly then it will last longer.
What size is my hot tub filter?
Always start by measuring the width (diameter) of your old cartridge across the outside edges of the end cap at its widest point. Note: Measurements may vary by about 1/8″ due to expansion, shrinkage, etc. For example, if you measure as a 5″ diameter, and can’t find a match, it may actually be a 4-15/16″ filter, etc.
How does the filter work in a hot tub?
Every hot tub has some type of filter, because even when your hot tub water looks clear, contaminants such as body oils, lotions, dirt, and other environmental debris are often present. The way filters work is fairly simple: Water passes through them, trapping unwanted particles in their folds.
How many filters does a spa have?
That unfiltered water is then pushed back out through the jets. Hot Spring spas, however, feature filters at every intake point and every return, for up to five filters total and up to 325 square feet of filtration capacity to support an exceptionally powerful jet output.
How often should I replace my hot tub filter?
To keep your spa sparkling and safe to use, replace your spa filter cartridges every 12-24 months.
Are all spa filters the same size?
So, Are All Inflatable Hot Tub Filters The Same? There are quite a few different types of hot tub filters. The material used for the pleats in the filters can vary, the type of filtration they use can vary, and their size can vary. It is imperative that you keep your hot tub’s water clean via filtration.
Why does my hot tub have two filters?
Some hot tubs don’t include filters at every intake location; instead, they rely on just one or two filters to handle a disproportionate volume of water. The intakes without filters have suction fittings that pull water into the pump. That unfiltered water is then pushed back out through the jets.
