Where is the reset button on my Jacuzzi?
The reset button is located in the equipment compartment. Plug the spa back into the power source. Check the circulation pump if the spa does not heat while jets and lights are working.
Why does my spa water heater not work?
The spa isn’t heating, or the water is a lot cooler than it used to be, but everything else seems operational. Your spa’s water passes through the filter before it moves on to the heater. If water flow is restricted by a dirty filter or debris in the Filter Housing, the heater may not operate.
What do you need to know about SPA will not heat?
NOTE: If you have a Printed Circuit Board (PCB) in the main control box please click here for circuit board troubleshooting. The information below is for mechanical control boxes, without circuit boards. “My spa will not heat” is the number one complaint we hear, it accounts for almost every repair that is sent in to Spa Care Center.
Why does my spa water pump have to be removed?
Pump may have to be removed for access to suction end. My spa is overheating. Your spa’s water passes through the filter before it moves on to the heater. If water flow is restricted by a dirty filter or debris in the Filter Housing, the heater may not operate.
When to turn off the heater in a spa?
The Hi-Limit shuts off the heater or spa equipment when it detects a water temperature of 109° – 116°. The Hi-Limit on most newer spas can be reset by turning off the spa’s main power supply, and allowing the water to cool to below 100°.
Why is my Master Spa heater not working?
It may not be that your master spa heater is not working; the problem might be in your filtration system. If the filter has to struggle or work really hard to pull water through the heating system, the heated water will not be able to move through the hot tub and do its job of relaxing you.
What to do if your hot tub is not working?
If you’re in charge of the hot tub at home, you immediately hear the complaints when the hot tub heater is not working properly. You need a quick solution to the problem of low heat or no heat in your spa or hot tub. We’ll walk you through some solutions for hot tub heater problems, including photos and links to help you fix your hot tub heater!
What happens if my hot tub heater gets clogged?
Some hot tub heaters have screens on the inlet side to trap any debris that gets past the filter. If this becomes clogged, you may notice reduced water flow coming into the spa or hot tub. A spa heater relies on sufficient water flow to operate.
How can I tell if my spa filter is tripping?
A good way to check if the filter is causing the hi-limit switch to trip, is to run the spa without the filter for a couple of days. If the hi-limit switch does not trip, then it is time to buy a new filter. (See Filters)
