Where is the reset button on a hot tub motor?
Locate the spa’s high-limit reset. This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple.
Why is the power button on my spa not working?
If you do not hear anything when the button is pressed the button may not be working. First cut off the power to the spa, then locate the electrical box inside the spa, it is normally located under the controls.
What to do if your spa does not come on?
Test or replace .3amp fuse next to terminal box where wiring attaches to the spa. If spa will still not come on test power coming to the spa using a voltage meter. If you do not have a voltage meter wait 6 minutes after turning on the power to see if the pump comes on then call support with findings.
What to do if your hot tub is not working?
If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is. If the control panel simply seems not to be working you can check the connections to it and also see if any water has got in it which could be the problem.
How to turn on a hot tub / spa with the valves?
The last thing to remember is after going into your spa turn your valves back to where they were prior to turning on your spa/hot tub. 100% spa suction off and 80% pool to 20% spa return side. If you can imagine what the pump is doing and taking water from it is very easy for you, the homeowner, to not get confused by this process!
What to do if your spa control is not working?
If only a part is not working, look for error messages or blinking lights. As a first step, reset your breaker. If the problem persists, turn the breaker off and disconnect the panel to examine the circuit board.
Why does my dead Spa have no power?
The greater disappointment is not being able to use the spa at that moment. If you’ve ever found a “dead spa” with no power, no indicator lights, nothing at all – this post is for you. Here, we outline the seven most common reasons that a hot tub has no power.
What to do if your hot tub control panel is not working?
As a first step, reset your breaker. If the problem persists, turn the breaker off and disconnect the panel to examine the circuit board. Turn the power on and check if the hot tub heats up or starts to filter. The surest way to check if a control panel works is to use one you know is working and connect it to the circuit board.
What to do if your spa control panel is frozen?
If the control panel is frozen or dead, you have to check if the problem is the control panel or the circuit board. Examine if there is moisture in the display. Check if there are cracked buttons or if a part is wet. If only a part is not working, look for error messages or blinking lights. As a first step, reset your breaker.
