Where is the ozonator on a hot tub?
Ozone-ready hot tubs usually have a small ozone jet near the bottom of the tub. This jet will have a water port, and an air (ozone) port. When no ozonator is present, the jet acts as a water jet only.
How do I check my spa ozonator?
An ozone test kit is available, and they work with a glass ampule that is connected into your ozone hose line (requires assembly). Turn on the ozonator and within a minute the color will change inside the ampule, in the presence of ozone.
Can I run my hot tub without the ozonator?
The quick answer is “no” but you can eliminate much of your customary sanitizer and shock with a properly functioning ozonator. The perfect combination with ozone is SilkBalance natural water care for spas and hot tubs.
How do I know if my ozone generator is working in my hot tub?
To identify if the ozone generator is working, the red, green or orange light should turn on (CD or CRT version) or the unit should glow (UV version). Ozone gas is clear and you may not even see anything flowing through the ozone tubing.
How long does a ozone generator last?
Ozone will last between 30 minutes to 4 hours for the third oxygen atom to breaks apart and reverts back into oxygen.
What is a ozone generator for hot tubs?
The ozonator is a device placed directly inside the body of your hot tub. It is equipped with an ultraviolet light bulb (or equivalent) that converts oxygen into ozone. The ozone travels through an air line connected to a water jet. The water and the ozone are then pushed into the hot tub.
How long do spa ozone generators last?
Usually, ozonators last around 3 years.
Where is the ozonator valve on a spa?
This line is connected to the Ozonator, which is a thick black and white line near the bottom of the equipment compartment. Unplug them: disconnect the ozonator valve from the yellow line.
How do you replace an ozonator in a hot tub?
With the ozonator cable unplugged, unthread it out of the control box and make note of the type of plug or connection so the replacement ozonator can be ordered with the same plug. Next unmount the ozone generator from the spa wall or mounting plate.
Can a qualified Spa Tech install an ozone generator?
Installing an ozone generator can be done by any qualified spa tech. Do-it-yourselfers may elect to do this repair. The following is provided for informational purposes. Working with any electrical appliance can be dangerous and such repairs should be left to qualified persons to avoid personal injury or equipment damage.
What should I do if my ozonator is not working?
A working ozonator produces a consistent stream of bubbles that is noticeable from the water’ s surface. Have an ozonator but don’t see any bubbles? Watch the video below or read on to learn how to troubleshoot and get your spa back to its bubbly best!* If playback doesn’t begin shortly, try restarting your device.
Do you need an ozonator for a spa?
Most spas are ozone ready so you will only need an ozonator kit and possibly a Venturi injector. The connection kit includes a small check valve which helps stop water from backing up into your air blower.
Can a ozone injector be installed in a hot tub?
If jet water line access is impractical, you can install an ozone injector manifold into the main water line. This line is the hot tub’s large plumbing, typically 1-1/2″ or 2″ I.D. flex pipe. The manifold employs a bypass valve to prevent jet pressure reduction and pump strain.
Do you need to replace the check valve on an ozonator?
The old hose is usually removed since the new ozonator usually comes with new tubing. The new ozonator kit will include the ozone generator, a check valve and ozone tubing as well as the cord and plug (see plug types below). Sometimes a new ozone injector will also be needed if that is how the old one was installed.
What kind of ozone generator does Saratoga Spa use?
Saratoga Spa Ozonator 121749 is the current model factory original replacement ozone generator for all Saratoga Spas. Aqua Sun Zone corona discharge ozonator. This Model Aqua Sun Zone 637-B Ozonator has a mini J&J type plug/cord.
