Where is the Hayward Ecostar variable speed pump located?
I’m in Cedar Park, TX (Outside of Austin) and had a pool put in last Winter (filled Feb, 2013). I have had pretty consistent issues with the Hayward Ecostar Variable Speed Pumps. I have a Pro Logic Panel that controls it. I continually have a Drive Error!
What to do when your Ecostar pump fails?
Got a “Drive Error! Pump has stalled” message. 1. Reset the error messages and tried to restart the pump. No go… 2. Cleaned out the skimmer basket. 3. Checked that no debris was jamming up the impeller 4. Checked my breakers to make sure the full 240V breakers weren’t tripped 5.
Why is my Hayward variable speed pool pump not working?
Hayward said that sometimes there isn’t enough plumbing and the pressure shuts down the pump. This is a pretty big builder in Austin, and they don’t think that is the issue. Plus, the pump runs at 100% from 7am to 11am on Timer 1 with no problem. Which pump are you having trouble with? **Hayward Variable Speed Ecostar, it’s the pool pump.
Why does my Hayward pump run at 2933 rpm?
The strange thing is it usually occurs in the afternoons, during timer 3, and not in the morning. Hayward came out and suggested that we limit it to 2933 RPM vs full of 3450, saying the plumbing possibly can’t handle. It seems to handle it fine all morning on Timer 1, it runs at 3450 without issue for 4 hours.
How to set Ecostar owner’s manual Hayward pool pump?
EcoStar Owner’s Manual Hayward EcoStar Pump SP3400VSP Thursday 1:27p 1725rpm 380 Watts Timer 1 timer will end at 11:45p Configuration Menu press > to enter Set Day and Time Thursday 1:27p Speed Selection rpm MAX allowed speed 3250 (600-3450rpm) MIN allowed speed 600 (600-3450rpm) Configuration Menu Locked
Is the Ecostar pool pump Energy Star certified?
Because EcoStar can match pump speed to a pool’s needs rather than running at full power 100% of the time, tests prove that it can save pool owners up to 90% on energy costs compared with ordinary single-speed pumps. In addition, because it’s ENERGY STAR certified, EcoStar may be eligible for power company rebates in many local markets.
What to do if your Ecostar pump is not working?
It is NOT an indication that something is wrong with the pump or drive. Shut off the breaker supplying the EcoStar with power for at least 2 minutes, verify screen is blank, then restore power. Inspect pump display The error has now cleared. If error frequently reoccurs AND pump is controlled by Hayward automation, proceed to step 1C.
Is the Hayward variable speed pool pump still working?
ORIGINAL REVIEW: This unit was installed a little less than 5 years ago, and it now has the “Pump Has Stalled” error of death. The motor still spins freely, there are no obstructions, and the pump has not seen heavy use at any time.
It is NOT an indication that something is wrong with the pump or drive. Shut off the breaker supplying the EcoStar with power for at least 2 minutes, verify screen is blank, then restore power. Inspect pump display The error has now cleared. If error frequently reoccurs AND pump is controlled by Hayward automation, proceed to step 1C.
When does The Ecostar sp3400vsp timer end?
SP3400VSP Thursday 1:27p 1725rpm 380 Watts Timer 1 timer will end at 11:45p Configuration Menu press > to enter Set Day and Time Thursday 1:27p Speed Selection rpm MAX allowed speed 3250 (600-3450rpm) MIN allowed speed 600 (600-3450rpm) Configuration Menu Locked Time: Th 1:27PM + change or > skip Use + / – to adjust,
What is the version of the Ecostar pool pump?
Product Version SP3400VSP Drive: 38ºC Heatsink: 32ºC Comm Bus: Online HUA: 10-00-00-00-55 Event log Press + to view Pump is stopped; press STOP/RESUME again to resume normal operation. SVRS inactive in Quick Clean mode.
I’m in Cedar Park, TX (Outside of Austin) and had a pool put in last Winter (filled Feb, 2013). I have had pretty consistent issues with the Hayward Ecostar Variable Speed Pumps. I have a Pro Logic Panel that controls it. I continually have a Drive Error!
How does The Ecostar variable speed pool work?
EcoStar’s next-generation digital control interface is intuitive to operate and easy to access in tight spaces. It can be rotated in four different directions or removed and wall-mounted. It also provides on-board diagnostics and automatic protection against priming failures, temperature extremes and voltage fluctuations.
How many wires are on a Ecostar pump?
Wire 7 on the pump to 2 on the controller, 8 on the pump to 3 on the controller and 1 on the pump to 4 to the controller as shown (fig 22 & 23). Reinstall plugs. Wire colors can be different as those shown as long as they match point to point. Control Data Plug Pump Terminal Data Plugs Figure 23 Figure 22 Page 10 8 7 2 3 1 4
Why do you need an Ecostar pool pump?
When operating at lower speeds, EcoStar moves pool and spa water more efficiently through the filter, removing more particles and creating clearer water. For added convenience, a no-rib basket design ensures easy debris removal. This innovative pump technology creates a cleaner, more easily managed pool.
