Where is the drain plug on my spa?
In any basic or advanced hot tub, a drain plug is located at the bottom of the spa. Now, depending on the hot tub model and brand, it could be present at any side of its walls.
How to drain, clean and re-fill your Sundance Hot Tub?
If your hot tub has Diverter Valves, turn them to the centre position. If your hot tub has air controls, turn them to the off position. Run Jet pumps for 2 hours (make sure all jets are running and have not been manually turned off). You will need to turn the jets back on every 20 minutes. You are ready to begin draining your Sundance Hot Tub.
What to do if your Sundance spa switch is defective?
Disconnect wires from Switch terminals. Set ohmmeter in the continuity position. Measure resistance across switch terminals for infinite resistance with pump off. If continuity is measured with pump off, the switch is defective. (Or debris blockage, l which you have to remove switch and inspect.
What is the error code on the Sundance Spa hot tub?
Sn1 Error Code: Heater is deactivated. High-limit sensor located in the heater drywell is nonfunctional. Sn3: Heater is deactivated. Main temperature sensor located in filter bucket is nonfunctional. 6. ILOC Error Code ILOC Error Code: Hot Tub is deactivated.
What kind of circulation pump does Sundance Spa use?
Note: This test only works on 850 Series with Circulation Pump prior to 2001: Try turning the #1 pump which is 2 speed.
Why do I get an error on my Sundance Spa hot tub?
In the first 4 years we basically used one filter and never got this error message. Last year we bought 2 new filters and we switch between them so they are basically hardly used. Both filters have been cleaned in a tub overnight with FilterBrite. We have turned the hot tub off and on numerous times and tried both filters with no luck.
How long does it take to drain a Sundance Hot Tub?
Run Jet pumps for 2 hours (make sure all jets are running and have not been manually turned off). You will need to turn the jets back on every 20 minutes. You are ready to begin draining your Sundance Hot Tub. Once you are ready to drain your Sundance hot tub, switch the power off at the GFCI breaker.
When do I get FL1 flashing on my Sundance spa?
HI, I just plugged in my Sundance spa and I’m getting the code FL1 flashing. Even before I hit any buttons. When I go to turn pump 1 on both speeds work.
What are the parts for a Sundance jacuzzi?
AIR CONTROL SMALL INTERNAL O-RING SUN6000-029 $2.49 AQUA TERRACE FOOTWELL LIGHT WALL FITTING – 2005-2006 SUN309002 $10.79 AQUA TERRACE LED FOOTWELL LIGHT 2005-2006 SUN6560-751 $163.19 BALBOA 6UR TEMP SENSOR FOR SUNDANCE BAL50111 $41.99 JACUZZI SPA “50 YEAR ANNIVERSARY” EMBLEM JAC2530-001 $5.99 JACUZZI SPA PROCLEAR MINERAL SPA SANITIZER JAC2890-185
