Where is the condensate drain pan in a vertical furnace?

A condensate drain pan is part of the evaporator coils. The evaporator coils is a box of coils that sits around the furnace. Its exact location depends on the type of furnace installation in your home. Vertical furnace installations are in the upright position. Typically, the furnace is installed in the furnace closet or garage.

Is the condensate Pan part of the evaporator coils?

Where is the drip pan on a whirlpool range?

Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. 40 Watt frosted appliance light bulb.

Where are the evaporator coils located on a horizontal furnace?

With these furnaces, the evaporator coils sit on top of the furnace. The condensate drain line is right beneath the evaporator coils. Horizontal furnace installations have the central air system lie on its side. The furnace is installed in the attic and placed in this position because of space constraints in the attic.

How big should a drain pan be for an AC unit?

The additional drain pan or drain pan connection shall be provided with a drain pipe that will determinate in an observable area, such as in front a window or above a doorway, and be of a size not less than 3/4”. Secondary drain pan shall not be less than 1-1/2” in height and extend 3” wider on each side of the coil or AC unit.

How big of a Pan do you need for a water heater?

2000 IRC – §2801.5 Required pan, pg 393 – “Where water heaters or hot water storage tanks are installed in locations where leakage of the tanks or connections will cause damage, the tank or water heater shall be installed in a galvanized steel pan having a minimum thickness of 24 gage (0.016 inch) (0.4 mm) or other pans approved for such use.”