Where are the circuit breakers on a 12V?
The circuit breakers are usually located next to the junction box mounted to the front A frame near the battery box rack. I have had that breaker rot away as well as the one on the rear for my power stabilizers.
Why is the breaker on my 12V not working?
If there is battery voltage on the battery side and no voltage on the trailer side the breaker is bad. If you have battery voltage on both sides of the breaker you need to check for voltage inside by removing the electrical panel cover. If you need more help chime back in and I’ll try to work you through it.
When do you say the 12v system is not working?
12V system is not working. Battery is fully charged. Fuses in the fusebox/converter were all checked and OK. Everything works when connected to AC power. Is there a separate fuse somewhere between the battery and the fusebox? Other suggestions? Thanks for your help. When you say the 12V system is not working, do you mean all the interior lights?
What to do if your 12V battery is not working?
Check the voltage at the battery and then at both posts on the breaker. It is a very good idea to add a switch to a battery cable, perhaps you have one that is turned off. If you have no volt meter, you need to get one. Any cheap meter will be OK, sometimes they are free with a coupon at Harbor Freight.
The circuit breakers are usually located next to the junction box mounted to the front A frame near the battery box rack. I have had that breaker rot away as well as the one on the rear for my power stabilizers.
If there is battery voltage on the battery side and no voltage on the trailer side the breaker is bad. If you have battery voltage on both sides of the breaker you need to check for voltage inside by removing the electrical panel cover. If you need more help chime back in and I’ll try to work you through it.
What to do when your circuit breaker is on but no power to the outlet?
However, there are times that the breaker is tripped but the handle does not move. In this case, you will want to move the handle to the off position and then back to the on position. Go back to the outlet and using a multimeter or a test light to see if there is power again.
12V system is not working. Battery is fully charged. Fuses in the fusebox/converter were all checked and OK. Everything works when connected to AC power. Is there a separate fuse somewhere between the battery and the fusebox? Other suggestions? Thanks for your help. When you say the 12V system is not working, do you mean all the interior lights?
