When to use Stingl switch model SR-500?
The Stingl-Switch Model SR-500 is designed to be easily retrofitted on all existing pools, hot tubs, and spas, and is easily installed during new pool and spa construction. 3 IMPORTANT INFORMATION NOTE: This device has been designed to terminate pump operation in the event of a potential limb or body entrapment.
Where can I buy a Stingl SR-500 vacuum?
Instructional Manual Model SR – 500 (Safety Vacuum Release System) Instructional Manual Model SR – 500 (Safety Vacuum Release System) Version 3.3 Stingl Products PMB #325, 21010 Southbank Street Sterling, VA 20165 Tel (571) 434.6010; (888) 749-5433 Fax (571) 434-6013 U.S. Patent No. 6,059,536/6,342,841
How to mount a SR 500 vacuum pump?
Mount the SR-500 in a suitable location within 8 feet of the pump. 2. Before mounting, remove SR-500 from its plastic enclosure by depressing tab in upper left and pulling top portion of SR-500. Slide SR-500 out from the top. At this point, record the serial number of your SR-500 on the warranty card. 3.
The Stingl-Switch Model SR-500 is designed to be easily retrofitted on all existing pools, hot tubs, and spas, and is easily installed during new pool and spa construction. 3 IMPORTANT INFORMATION NOTE: This device has been designed to terminate pump operation in the event of a potential limb or body entrapment.
Instructional Manual Model SR – 500 (Safety Vacuum Release System) Instructional Manual Model SR – 500 (Safety Vacuum Release System) Version 3.3 Stingl Products PMB #325, 21010 Southbank Street Sterling, VA 20165 Tel (571) 434.6010; (888) 749-5433 Fax (571) 434-6013 U.S. Patent No. 6,059,536/6,342,841
When does a weir gate need to be replaced?
Weir gates can break when they become old and brittle, or from a lot of splashing when kids are swimming. If the weir gate is broken, or missing, it should be replaced.
What does a weir gate on a skimmer do?
Its amazing how often I see the skimmer missing its weir gate and how many people, including pool technicians who clean pools every week, that don’t know what it is, or what it does. The weir gate is simply a way to keep the debris that is sucked into the skimmer, from getting back out into the pool.
