What type of oil does a 2010 Toyota Corolla use?
Engine Oil
| Viscosity: | 0W-20, 5W-20 (All TEMPS) 0W-20 is the best choice for good fuel economy and starting in cold weather. |
|---|---|
| Capacity: | 4.4 quarts (with filter)After refill check oil level. |
| Torque: | 27 ft/lbs (Oil Drain Plug) |
How much oil does a 2010 Corolla hold?
The 2010 Toyota Corolla useS4. 4 quarts of oil for the 1.8l engines and 4.0 quarts for the 2.4l engines. It is recommended to use SAE 5w-20 oil although You can also use 0w-20.
How often does a 2010 Toyota Corolla need an oil change?
How often does a Toyota Corolla need an Oil Change? An oil change is one of the most necessary and crucial services for your car. Synthetic oil regularly should be changed every 7,500 – 10,000 miles. Toyota recommends getting your Toyota Corolla oil & filter changed every 3,000-5,000 miles for conventional oil.
Does 2010 Corolla use synthetic oil?
The 2010 Toyota Corolla’s 1.8 liter 4Cylinder engine requireS4. The 2.4 liter 4Cylinder useS4 US quarts of 5W-20 or 0W-20. Oil and filter changes should be scheduled every 7,500-10,000 miles or 12 months if using fully synthetic lubricants, or every 3,000-5,000 miles or 6 months, if filling with conventional oil.
What is the best engine oil for Toyota Corolla?
For Corollas made in 2008 or before:
| Brand | Mobil 1 | Valvoline |
|---|---|---|
| Link | Mobil 1 Extended Performance High Mileage Full-Synthetic 5W-30 | Valvoline Advanced SynPower Full Synthetic 5W-30 |
| Weight | 5W-30 | 5W-30 |
| API | API SN | API SN-RC |
| ILSAC | ILSAC GF-5 | ILSAC GF-5 |
Does a 2010 Toyota Corolla require synthetic oil?
Toyota recommends using Toyota Genuine Motor Oil SAE 5W-20 or 0W-20 for the 2010 Corolla. Both Toyota Genuine oils are synthesis oils. Only Toyota vehicles in which 0w-20 synthetic oil is required (except for the 2TR-FE & 3UR-FBE Engines*) have been approved for extended oil change intervals of 10,000-miles/12-months.
Does Toyota recommend synthetic oil?
Toyota recommends synthetic oil in all of their vehicles and requires it on some model years, check your owner’s manual to find the recommended oil for your specific Toyota vehicle.
How do you reset the maintenance light on a 2010 Toyota Corolla?
Put your key in the ignition and turn it to position one (right before starting the car). Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping.
How much is an oil change for a Corolla?
The average cost for a Toyota Corolla oil change is between $116 and $129. Labor costs are estimated between $47 and $59 while parts are priced at $70.
Do 2010 Corollas burn oil?
According to Toyota using a quart of oil every 1000 miles is normal for that year/engine. How much oil are you using? You probably won’t notice oil burning unless it is leaking into cylinders overnight . Then you may see a puff of smoke upon starting the engine first thing in the morning.
How often do you change the oil on a Toyota Corolla?
The 2010 Toyota Corolla’s 1.8 liter 4Cylinder engine requireS4.4 US quarts of 0W-20 with a filter. The 2.4 liter 4Cylinder useS4 US quarts of 5W-20 or 0W-20. Oil and filter changes should be scheduled every 7,500-10,000 miles or 12 months if using fully synthetic lubricants, or every 3,000-5,000 miles or 6 months, if filling with conventional oil.
Where can I find a Toyota Corolla oil filter wrench?
If you can’t do this, see our parts page to find a Toyota Corolla oil filter wrench. If your Corolla is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Corolla.
Where is the oil collection pan on a corolla?
In order to change the oil, follow these steps: Climb under the Corolla and locate the drain oil plug. This sits below the engine. Slide the oil collection pan under the drain plug.
How often should I change my Toyota Corolla air filter?
Interval: Once a year under normal driving conditions. 1) Unsnap the two metals catches on the air filter cover (located to the right of the engine when facing the hood). 2) Pull the upper cover toward you until it disengages from the lower part of the filter housing. 3) Remove the filter and discard. 4) Seat the new filter in the lower housing.
The 2010 Toyota Corolla’s 1.8 liter 4Cylinder engine requireS4.4 US quarts of 0W-20 with a filter. The 2.4 liter 4Cylinder useS4 US quarts of 5W-20 or 0W-20. Oil and filter changes should be scheduled every 7,500-10,000 miles or 12 months if using fully synthetic lubricants, or every 3,000-5,000 miles or 6 months, if filling with conventional oil.
Interval: Once a year under normal driving conditions. 1) Unsnap the two metals catches on the air filter cover (located to the right of the engine when facing the hood). 2) Pull the upper cover toward you until it disengages from the lower part of the filter housing. 3) Remove the filter and discard. 4) Seat the new filter in the lower housing.
How to change the oil in a 1.8L engine?
We will change the oil, oil filter, air filter and spark plugs on this 1.8L engine. Tools: 14mm socket and ratchet, 65mm oil filter wrench with 14 flutes, oil catch pan, filling funnel and two car ramps. Materials: 4 ¼ qts 5W-20, oil filter (Fram CH10358), gloves, rags, bottle for the used oil.
