What to know when installing a WFCO power center?
INSTALLATIONINSTALLATION OF THE 8900 SERIES OF THE 8900 SERIES POWER CENTER Caution should be used when installing the 8900 series. Be sure that all openings are protected from debris falling into the converter. Metal shavings and debris from the manufacturing process may cause damage (This is a non-warranty item)
What are tips and tips on WFCO products?
The technical information and tips in the WFCO product manuals are for engineers, installers, and service technicians. TABLE OF CONTENTS Page 1. Lamp Short Test Diagram 2. Mounting on the 8700 series power center 3. Installation of the 8700 series power center 4. Quick check on the series 8700 5. Mounting of the 8900 series power center 6.
When to contact WFCO Power Pro for warranty?
For Dealers and Retail Customers: During the first year, manufacturers (OEMs) typically cover the warranty. If not, please contact the WFCO Power PROs at 877-294-8997. Troubleshoot your unit with the Power PROs before filing any warranty claim.
Is there a manual for a WFCO converter?
Yes, WFCO provides a manual with every converter and power/distribution center. Manuals also can be obtained by clicking here, selecting your product under the “Products” tab, and clicking on “More Info” and “Downloads”.
How many AC branch circuits does a wf-8900 have?
Highly featured, light weight models from 35 to 75 Amps with up to nine AC and 11 DC branch circuits and 30 Amp main circuit breaker. Front cooling fans in some models allow small “zero clearance” footprint.
Yes, WFCO provides a manual with every converter and power/distribution center. Manuals also can be obtained by clicking here, selecting your product under the “Products” tab, and clicking on “More Info” and “Downloads”.
For Dealers and Retail Customers: During the first year, manufacturers (OEMs) typically cover the warranty. If not, please contact the WFCO Power PROs at 877-294-8997. Troubleshoot your unit with the Power PROs before filing any warranty claim.
What should the voltage be on a WFCO Charger?
The converter voltage will drop to 13.2V DC. If the converter sees any load during this period or after it is in Float mode, it will revert back to Absorption (Normal) mode- 13.6V DC. Can I use any battery with WFCO chargers? Deep-cycle batteries are recommended. They can be either of the Lead-Acid or AGM type.
