What to do when your Master Spa shuts down?

Try unplugging topside and plugging into another port. Check the fuse for topside. Find replacement fuse. “Overheat”- The spa has shut down. On some systems, an alarm will sound. One of the sensors detected 118°F at the heater. Remove spa cover and let the water cool down. After the water has cooled, push any button to reset.

What does it mean when your Master Spa says dry?

A substantial difference between the temperature sensors was detected. This could indicate a flow problem. For the error messages of HFL, LF, Dr, or DRY. This means that there is a flow issue through your heater. Try and clean your filters.

Why do I get error messages on my Master Spa?

For the error messages of HFL, LF, Dr, or DRY. This means that there is a flow issue through your heater. Try and clean your filters. While cleaning your filter make sure there is no debris in your hot tub that will get sucked down into your pump.

What are the features of the LSX 800 hot tub?

Live life better with the LSX 800, a premium hot tub inspired by the best. The spacious model offers premium features, beautiful styling, and outstanding performance. Up to six adults can enjoy the ultimate in hydrotherapy thanks to the 70 Orbit jets, lounge seating, and Master Blaster Foot Therapy.

What to do if your master spa pump is not working?

While cleaning your filter make sure there is no debris in your hot tub that will get sucked down into your pump. Run a hot tub temporarily with filters out of the hot tub and see if the problem continues.

Where can I find the owner’s manual for my Master Spa?

To locate the appropriate spa owner’s manual, select the model of your hot tub or swim spa below. If after reviewing the owner’s manual, you have any questions regarding the installation, use, or maintenance of your Master Spas, please contact your local dealer or the Master Spas Customer Care team . Thank you for choosing Master Spas.

What should I do if my Master Spa is overheating?

One of the sensors detected 118°F at the heater. Remove spa cover and let the water cool down. After the water has cooled, push any button to reset. If the spa doesn’t reset there is an issue with sensors onPC board. Find replacement PC board “Overheat”-The spa has shut down. One of the sensors has detected that the spa water is 110°F.