What to do when your hot tub jets are not working?
If the jets seem to have less than the normal volume of water coming through, be sure that the pump is turning on like normal. Digital spas typically have to push the display to enter the jet mode. Older spa controls use an air button to activate the jet pump.
Is it safe to replace the Jets in a spa?
Drain the water from your spa. It is not safe to replace the jets while water is still in the tub. Drain all water out of the tub before working on your jets. To drain your tub, first turn off the spa’s circuit breaker.
Why does my hot tub shut down after maintenance?
The key to a healthy spa after water maintenance is a clean filter. Body oils and residue can cause blockage and require a de-greasing agent. When this blockage occurs you will most likely receive a error code on your topside control like FLO. This means water cannot effectively flow through a dirty filter and often your hot tub will shut down.
How do I get water out of my spa Jets?
Drain all water out of the tub before working on your jets. To drain your tub, first turn off the spa’s circuit breaker. Then, remove the front panel of your tub and find the hose spigot. Attach a garden hose to the spigot and drain the water out of the tub.
Is there a problem with my hot tub jets?
This is something that is best left to the experts. Fortunately, most problems with hot tub jets are as easy to sort out as changing the filters or topping up the water level. A hard water problem should never arise in reality since a test of your water supply will have indicated that the tub required the water to be treated.
When do Master Spa hot tub jets come out?
Plus, Master Spa Parts typically ships same day if order is placed before 3pm CST, so you can have your hot tub up and running again in no time. While frustrating, an issue with your hot tub jets or pump isn’t the end of the road for your hot tub.
Why does my hot tub keep losing air?
The only cure for this is to install a water softener for the tub. When a spa tub is drained, there is a possibility that air will get into the pump and lock it. The air is elastic, so the pump loses traction on the water. The only way to fix this is to bleed the air out of the pump.
How do you bleed air out of a hot tub?
In this instance, the air needs to be bled out of the lines. Look for the small bleed screws that are at the end of your pump and open them to allow air out. ALWAYS do this with the power off and close them quickly to avoid spraying water. Some hot tubs have a bleed screw on the top of the filter so make sure to let out air there, too.
