What to do when your hot tub is in sleep mode?
It normally requires the pressing of a couple of buttons on the control panel. One thing to keep in mind while using sleep mode is that your hot tub’s filtration system will only be working every so often.
How does the ThermoSpas work in standard mode?
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
How to turn off pump 1 on the ThermoSpas?
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
Can a computer go into deep sleep mode?
The length of time is based on your specific model and settings. Deep Sleep mode uses less power than Sleep mode. Deep Sleep mode cannot be disabled. 1. How is your machine connected to your computer? – If Wireless, go to step 2. 2. Print the Network Configuration report. 3. Did the report print? – If Yes, go to step 4.
It normally requires the pressing of a couple of buttons on the control panel. One thing to keep in mind while using sleep mode is that your hot tub’s filtration system will only be working every so often.
Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’). Sleep Mode heats the spa to within 20° of the temperature set-point, but only during filtration cycles.
Pump 1 Pump 1 is a 2 speed pump. Pressing once puts the pump into low speed, indicated on the LCD by a slow moving pump icon . Pressing a second time activates Pump 1 to high speed (icon moves faster). To turn off, press a third time (icon disappears from the LCD).
When to use standard mode or sleep mode?
We were told that if we wanted to keep the spa going 24/7 we can set it to standard mode during the day, and sleep mode at night. The filter will be going still, but the heater heats less often, and the jets only go every few hours rather then every hour or so in standard mode.
