What to do when you need to replace a bathtub?
If the drain opening is on the left side, look for a left drain tub. If it’s on the right, you need a right drain tub. Before tackling the bathtub removal, shut off the water supply to the tub. If your bathroom doesn’t have a separate shutoff valve, turn off the water to the entire house. Test that the water is off by turning on the bathtub faucet.
How do you install a drain in a bathtub?
Now that the drains are connected to the tub, cut the ABS pipes to the correct length and glue the drain assembly together using ABS glue. Make sure the connections are in the right direction so the water is able to drain properly. Now, remove the finished drain assembly from the bathtub.
How do you install a new bathtub at Home Depot?
Cut a 2 x 4 the length of your tub. Use deck screws to attach it to the studs on the new reference marks. To put in the drain, turn the tub on its side and install it according to the manufacturer’s instructions. Take a bit of plumber’s putty, roll it in your hands and place it on the underside of the drain flange.
How to replace an old bathtub drum trap?
Rating is available when the video has been rented. This feature is not available right now. Please try again later. This Old House plumbing and heating expert Richard Trethewey shows how to replace an old bathtub drum trap with a new PVC P-trap. (See below for a shopping list and tools.)
If the drain opening is on the left side, look for a left drain tub. If it’s on the right, you need a right drain tub. Before tackling the bathtub removal, shut off the water supply to the tub. If your bathroom doesn’t have a separate shutoff valve, turn off the water to the entire house. Test that the water is off by turning on the bathtub faucet.
Cut a 2 x 4 the length of your tub. Use deck screws to attach it to the studs on the new reference marks. To put in the drain, turn the tub on its side and install it according to the manufacturer’s instructions. Take a bit of plumber’s putty, roll it in your hands and place it on the underside of the drain flange.
Can you remove an old tub and install a new one?
Removing an old tub and installing a new one may seem daunting, but if you carefully prepare and work with a helper, you can complete this DIY project in one day. This guide will teach you how to remove your old bathtub and install a new one. Wear protective eye gear and gloves when removing any kind of tub. You may also want hearing protection.
How do you replace a water spout in a bathroom?
Step 1: Shut off your water supply and remove your spout from the wall. Step 2: Take it to the hardware store and buy a suitable replacement. Step 3: Bring your new spout home and read the instructions. Step 4: Use vinegar and a soft brush to clean any debris off the copper piping on the bathroom wall.
