What to do if your water heater light doesnt work?
If that doesn’t work, clean it: shut off both the water heater gas valve and the main gas line near the heater. Unscrew the three nuts that hold the thermocouple and the two gas tubes to the valve. The burner is usually easy to just slide out.
Where does the hot water come from in a RV?
You may need to remove a cover to access it. Cold water comes in at the bottom and hot water comes out of the top of the heater. If your RV has a bypass valve, these two pipes will be connected directly to each other using a third pipe. The lever of the valve should point in the direction that you want the water to flow.
Why does my hot water heater have a yellow flame?
An insufficient flame will also cause soot around the exhaust area. If you have a weak yellow flame, your burner isn’t getting enough air. An ideal flame would be one that has a blue flame with yellow tips. Check to see if the burner nozzle is clogged.
What kind of tank does Atwood water heater have?
Additionally, Atwood water heaters have aluminum tanks that act as anode rods, thus the situation is a bit different for these. Now that you know the essentials about your onboard RV water heater, Dave has a few extra expert tips for operating and maintaining your specific unit.
What to do if your hot water tank won’t stay lit?
Here’s a solution for your hot water tanks that won’t stay lit!! There are other tanks that have light sensors, flame sensors and someone, if that’s yours this will still work. You’ll have to make sure the other sensors on your tank are all working though. This can be accomplished with a $10 multi metre and basically zero knowledge of electronics.
Is there a light sensor on my hot water tank?
There are other tanks that have light sensors, flame sensors and someone, if that’s yours this will still work. You’ll have to make sure the other sensors on your tank are all working though. This can be accomplished with a $10 multi metre and basically zero knowledge of electronics. There are tutorials galore for testing these sorts of things.
How can I tell if my water tank is full?
If your tank is empty, or even just low, your RV water pump will not work. (It needs something to pump!) B. Now that you know your tanks are full, the next step is to check all the water lines that lead in and out of the actual water pump. Look for loose connections and worn, split or cracked lines.
Is it good to winterize your hot water tank?
If you’re storing it during cold months, it’s a good idea to winterize the pipes so they don’t freeze, crack, and cause problems the first time you head back out in the spring. Similarly, water left in your RV’s hot water tank can freeze, causing irreparable damage to the unit.
