What to do if your Vita Spa is not working?
DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down. Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues.
What to do if your hot tub does not heat?
To do this, consult the manufacturer’s guide or find it online. There are some simple things you could try if the hot tub does not heat the water. First of all, open and close the spa door on the spa cabinet, and see if it starts heating. If the hot tub is gas-powered, you should check if the pilot light turned off and turn it back on.
Why does my hot tub have an error code of HFL?
This error code will display the fifth time that the “HFL” message occurs within 24 hours.With this error, the heater will shut down, but other functions of the hot tub will continue to operate normally. Issue is possibly caused by low water or a plugged filter.
What does cover guy on Vita spa stand for?
The Cover Guy provides all Vita Spa replacement covers so you are guaranteed a perfect fit every time. These are the error codes and display messages that a ThermoSpas Hot Tub may display, along with what they mean and any actions required: Stands for “Overheat”- and the tub shuts down.
DO NOT GET INTO THE WATER! Take off the heat shield cover to allow the water to cool down. Make sure that the slice valves are open and reprogram the spa to make sure there are no overlapping time cycles. Open all jets. Contact the dealer or service organization if the problem continues.
Why is my hot tub not heating up?
This is a safety feature that prevents your heater from overheating or having a meltdown. If broken, the water can end up being scalding hot and the heater will not shut off. This is usually caused by a dirty water filter. Other causes can be clogged pumps, closed valves, or blocked drains.
This error code will display the fifth time that the “HFL” message occurs within 24 hours.With this error, the heater will shut down, but other functions of the hot tub will continue to operate normally. Issue is possibly caused by low water or a plugged filter.
Is it possible to use a hot tub without heat?
You can use a hot tub without heat, but do not cut power to the hot tub. You need the pump circulating the water through the filters to ensure proper water quality. Switching the mode to economy or sleep will reduce heating cycles and lower the temperature by as much as 20 degrees. But that’s just the beginning!
