What to do if your PowerPoint slides dont move?
Issue 1. if you have set up a Custom Slide Show with just the first slide. Solution: Go to your slideshow tab > Custom Slideshow and check if you have any listed there and remove them. You would set up Custom Slide Show if you wanted to exclude certain slides or reorder existing slides for a particular presentation.
Why is my slide out not working in my RV?
Before you assume that something has broken or is stuck within the slide out mechanism itself, check to see if you are getting enough power from your battery to run the system. You obviously need sufficient voltage from your battery to make the slide out move properly, so an old or worn out battery may be the underlying problem.
Why does my slide out move when parked?
You might move the slide out and just a little and measure all four corner distances from the outside wall and the slide wall that seals to the main wall. Any difference could indicate an out of adjustment issue.
What should I do if my slide out goes out?
If all else fails, slide outs, whether hydraulic or electric, have manual overrides in case of mechanical failures. You will likely need to disengage the brake assembly in order to move the slide out. Look in your owner’s manual to find out the location of the manual override, brake assembly, and any tools needed.
What to do when slide outs don’t move?
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
What happens if you push the slide out button?
If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.
Why is my slide out motor not working?
RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.
Is there an electrical problem with the slide out?
Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.
