What temperature should a hot tub be?
Your hot tub factory settings will be at 38 degrees, but body temperature of 37 degrees is a generally good start for your hot tub. It’s regarded that women tend to like it slightly hotter at 38 – 39 degrees. This may be that women on the whole tend to feel the cold more than men.
What is the lowest temperature for a hot tub?
80° F.
If you have not winterized your spa and won’t be using your hot tub for extended periods during the coldest months, the very lowest you should set your hot tub temperature is 80° F. This will prevent your hot tub from freezing.
When did Sundance Spas come out with control panels?
Sundance® was one of the first to offer electronic controls on spas. A new technology at the time which is now widely used on most spas today. Sundance Spas came out with their own Spa Side Control Systems and Printed Circuit Boards in 1991. These Spa Side Control Panels are unique to Sundance Spas.
What is the error code on the Sundance Spa hot tub?
Sn1 Error Code: Heater is deactivated. High-limit sensor located in the heater drywell is nonfunctional. Sn3: Heater is deactivated. Main temperature sensor located in filter bucket is nonfunctional. 6. ILOC Error Code ILOC Error Code: Hot Tub is deactivated.
How can I tell if my Sundance spa filter is defective?
The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter. 2. Defective Circ Pump or Flow Switch: Need to check for Circ Pump operation.
What to do if the main pump is off in Sundance spa?
If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.
What does the Sundance spa temp sensor 6600-167 do?
The Jacuzzi Spa Temp Sensor 6600-167 is a service part intended for professional repair and maintenance of both Sundance Spas and Jacuzzi hot tubs. This part does not include O-ring 6540-228 (sold separately). This part fits multiple models and years of Sundance Spas and Jacuzzi.
How much does a Sundance remote control cost?
REMOTE CONTROL TOPSIDE GASKET SUN6630-019 $7.19 SMT DIRECTIONAL JETFACE STAINLESS STEEL SUN6541-751 $22.79 SMT MINI DIRECTIONAL JETFACE STAINLESS STEEL SUN6541-554 $24.95 SUNDANCE 2″ ACCU-PRESSURE EURO JET WITH SS ESCUTCHEON SUN6541-100 $7.63 SUNDANCE AQUA TERRACE WATERFALL VALVE KNOB SUN6000-605 $9.39 SUNDANCE BOX END CONNECTOR PIN SUN6660-060
Sn1 Error Code: Heater is deactivated. High-limit sensor located in the heater drywell is nonfunctional. Sn3: Heater is deactivated. Main temperature sensor located in filter bucket is nonfunctional. 6. ILOC Error Code ILOC Error Code: Hot Tub is deactivated.
How much does a Sundance spa stereo cost?
SUNDANCE SPA STEREO ENCLOSURE DOOR – GRAY SUN6000-274 $9.32 SUNDANCE SPA WHIRLPOOL JET W/ EYEBALL, STAINLESS ESCUTCHEON – 2005+ SUN6541-233 $32.39 1987-1990 SUNDANCE HEATER ELEMENT, NO CORD 25-24042 $0.00 AIR CONTROL SMALL INTERNAL O-RING SUN6000-029 $2.49
