What size supply line is needed for a washing machine?
Two standard hoses are connected from the back of the washing machine to the water supply valves. The hot and cold hoses are ¾ inches in diameter. The hoses typically are marked to distinguish them from each other. Some hoses are constructed to be used for both hot and cold water.
Can you use any hose for washing machine?
All washing machines should use standard sizes and fittings. You will always get new fill hoses with a new washing machine. If it isn’t too much trouble, it makes sense to use the new hoses if possible unless you are happy that the existing hoses are still in excellent condition.
Should I get new hoses for new washing machine?
Yes. Try to make it a habit to replace hoses when ever a new machine is purchased. New hoses will prevent rupture and possible flooding.
Where does the water line go to a washing machine?
In most homes these days, the supply pipes run into an open-front plastic box set into the wall, known as a washer box. There, each water line terminates at a shut-off valve that controls the flow of water to the washer.
How do you cut a line for a washing machine?
Turn off the water to the supply pipes you plan to use, cut them with a pipe cutter and solder a copper tee into each one. Assemble the hot and cold supply pipes to the washer, terminating them in stub-outs that extend about an inch past the wall.
Where are the hot and cold supply lines on a washing machine?
Assemble the hot and cold supply pipes to the washer, terminating them in stub-outs that extend about an inch past the wall. They should be just above the washing machine so they are always accessible. Solder all the pipe connections when you are sure everything fits.
What kind of plumbing do you need for a washing machine?
The parts and labor required for a code-compliant hookup are inexpensive and simple enough that it’s worth it to update the plumbing connections as part of the job. A washing machine receives hot and cold water from ordinary branch water lines, typically ½” rigid copper pipes.
Where is the water line for a washing machine?
The box should be centered between a pair of studs and 42 inches above the floor. Turn off the water to the appropriate hot and cold water lines from which you will draw water for the washer. The supply lines for the laundry sink are ideal. Open a faucet connected to the lines to relieve pressure.
Turn off the water to the supply pipes you plan to use, cut them with a pipe cutter and solder a copper tee into each one. Assemble the hot and cold supply pipes to the washer, terminating them in stub-outs that extend about an inch past the wall.
How big does a water supply line need to be?
As a specific example an 1 1/4″ line can deliver approximately 21 gallons per minute over a 30′ run, yet only approximately 14 gallons per minute over a 60′ run. While the length of run is a major factor for all water supply line size calculations, it becomes more of factor when the run is unusually long.
Can a washing machine be connected to the plumbing?
Washing machines often come with their own fill hoses. However, most fill hoses are just long enough to connect to the plumbing right next to the washing machine. If the location of the washing machine is slightly too far from the plumbing, you will have to exchange the hose with a longer one or extend the existing fill hose.
