What size pipe is a washing machine drain?
2-inch
Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.
Do you need a drain for a washing machine?
Most people assume that drainage is something a washing machine does automatically. However, this appliance actually needs a pump and drain line to drain properly. If the machine breaks down or if you are moving the machine, you need to take a little extra time to drain it completely.
Does the washing machine drain need a trap?
When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
What kind of hose does a washing machine use?
Today most washing machines come supplied with a flexible, corrugated plastic drain hose. The hose is easily inserted into a standard washing machine drain box (see photo). The washing machine drain box is hooked up to the houses waste piping that contains a P-Trap inside the wall (or exposed in older homes).
How big should the drain pipe be for a washing machine?
The outside diameter of the drain hose attached to the washing machine is 1¼”. The reason you want to have the drain pipe slightly larger is to allow for ventilation. Increasing the inside diameter of the drain pipe to 2″ might help more. Drain hose from washing machine pushed too far down into the drain pipe.
Where are the water lines for a washer and dryer?
Separate the two water lines for the washer. The cold water line should be clearly marked with blue paint. The hot water line should be marked with red. The hoses may even be completely colored, one red, one blue. Locate two female fixtures with threads emerging from the back of the washer at the top. They may be on the left or right.
What kind of plumbing do you need for a washer and dryer?
These hookups include hot and cold water faucets for the washer, and a 4-inch dryer vent pipe for the dryer. Standard hot and cold water lines are very similar to short garden hoses. Dryer vent hose is flexible, and fits readily onto the vent pipe extending from the wall and the dryer exhaust pipe using only circular clamps.
Where are the pipes and hoses on a washing machine?
The pipes and hoses are behind the washing machine. A washing machine is connected to a drain hose and to hoses that connect to the hot and cold water supply. The drain hose is connected to a stand pipe attached to the water drainpipe.
Is there an extension hose for a washing machine?
Vis 6ft Washing Machine Drain Discharge Hose Corrugated and Universal Dishwasher Hose With Clamp-Fits Up To 1-1/2 Inch Drain Outlets Extension. . Only 11 left in stock – order soon. . . . .
How big of a pipe do you need for a washing machine?
What Size Pipe Is Needed for a Washing Machine? 1 Stand Pipe. The stand pipe, which taps into the water supply drain line, should be 2 inches in diameter. 2 Drain Hose. The drain hose, which drains the water out of the washer, can be connected to an existing laundry sink or into the stand pipe. 3 Hot and Cold Hoses. 4 Installing.
How big is a drain hose for a washer?
Drain Hose. The drain hose, which drains the water out of the washer, can be connected to an existing laundry sink or into the stand pipe. The drain hose is available in different lengths, and universal sizes are 1 to 1¼ inches in diameter.
